Abstract:<p>This paper proposes a steel frame assembled with a concrete-filled steel tubular (CFST)-bordered composite wall structure. The composite wall was fabricated as an assembled seismic member to improve the seismic performance of the steel frame. Therefore, on the basis of a full-sized bare steel frame as a contrast specimen, four full-sized steel frames assembled with CFST-bordered composite wall specimens were designed. The differences among these four specimens include the use of inclined braces in the CFST-bordered composite walls and the different designs of the inclined braces, and these differences are to investigate the influence of the inclined braces on the proposed structures. Low cyclic loading was applied to the specimens, and the seismic behavior of each specimen was analyzed. The experimental results indicated that the seismic performance of the bare frame was greatly enhanced by the assembled CFST-bordered composite wall. The setting of the rebar braces or the CFST braces can significantly increase the yield load, peak load, and dissipation energy capacity, and the inverted V-shaped braces are efficient. The rebar braces can also delay concrete cracking and release strength degeneration. As the first line of defense, the damage of the CFST-bordered composite wall occurs earlier than that of the steel frame, and the damage of the steel frame is slight when the CFST-bordered composite wall is broken. The steel frame can still work as the second line of defense to prevent the collapse of the structure. Furthermore, calculation methods were proposed for determining the bearing capacities of the bare steel frame and the CFST-bordered composite wall based on the failure modes identified during testing and finite element analysis. The calculated results were in good agreement with the test results.</p>

Experimental study on seismic behaviors of shear wall supported by frame with steel reinforcing

Seismic Behavior of Composite Shear Walls Incorporating Concrete-Filled Steel and FRP Tubes As Boundary Elements

Experimental Investigation of Steel Frames with Infill Prefabricated Reinforce-Concrete Shear Walls

Experimental Study on Seismic Behavior of Steel Frame with Prefabricated Reinforced Concrete Infill Slit Shear Walls

Experimental study and numerical simulation of seismic performance of stiffened thin steel plate shear walls considering the effect of vertical load on frame column

Study on the Seismic Performance of Frame-shear Wall Structures with High-strength Reinforced the Shear Wall

Experimental Study on Seismic Performance of Composite Shear Wall with Horizontal Connection and Frame

Experimental study and FEM analysis on seismic behavior of a three-storied structural wall

Seismic behavior of multi-story structural walls under cyclic lateral loading: Experimental study

Seismic behavior of prefabricated concrete filled steel tube-bordered monolayer reinforced shear wall

Study on Seismic Design Shear Force for Frame of Steel Frame-concrete Core Wall Structures

Experimental study on the seismic performance of short shear walls comprising cold-formed steel and high-strength reinforced concrete with concealed bracing

Seismic performance evaluation of an infilled rocking wall frame structure through quasi-static cyclic testing

Experimental Study of Bearing Capacity of Steel Frame with Portal Steel Plate Shear Wall Member

Experimental study on three types of steel plate shear walls under cyclic loading

Experimental Study on Seismic Performance of Mid-Rise Composite Shear Walls with CFT Columns and Embedded Steel Plate

Seismic performance of a steel frame assembled with a CFST-bordered composite wall structure

Experimental evaluation of cyclic behavior of precast concrete frame with steel shear wall

Experimental research on special steel frame with stiffened double steel plate shear wall

Experimental Research on Seismic Behavior of Low Shear-Span Ratio Composite Shear Wall with Double Steel Plates and Infill Concrete

Seismic behavior of steel frame infilled with wall-panels connected by sliding joint