Abstract:A small sample size automated adiabatic calorimeter for measuring heat capacities in the temperature range of 60-360 K has been constructed. The sample cell of the calorimeter was made of thin-walled gold-plated copper with an internal volume of 6 cm(3), equipped with a miniature platinum thermometer, surrounded by two adiabatic shields and housed in a high vacuum can. Two sets of six-junction chromel-constantan thermocouples were mounted between the cell and shields to indicate the temperature difference between them. The lid of the cell was sealed to the main body with a special sealant cycleweld. The adiabatic conditions of the calorimeter cell were automatically controlled by two units of temperature controller. A mechanical pump was used to pump out the vapor of liquid nitrogen in the cryostat to obtain 60 K or even lower temperature. All the experimental data, including the electrical energy and temperature were collected and processed automatically by a personal computer with a predetermined program. The performance of the calorimeter was examined by measuring the heat capacities of alpha-Al2O3. The deviations of experimental results from the smoothed curve lie within +/-0.2%, while the inaccuracy is within +/-0.5% compared with the recommended reference data.The heat capacities of two important nonlinear optical crystals KTiOPO4 and RbTiOAsO4 have been measured by using this calorimeter in the range of 60-360 K, No thermal anomaly was observed from the heat capacity measurements for the two materials in the above-mentioned range. (C) 2000 Elsevier Science B.V. All rights reserved.

Adiabatic calorimetry and thermal analysis on acetaminophen

Heat Capacities of Binary Mixtures of Acetic Acid with Acetic Anhydride and Methenamine at Different Temperatures

Low-temperature Heat Capacities and Thermodynamic Properties of Mn 3 (HEDTA) 2 ·10H 2 O

Molar excess enthalpies of ethyl acetate+alkanols at T=298.15K, p=10.0MPa

A Power-Modulated Accelerating Rate Calorimetry for Varying Heat Capacity Measurement During Thermal Decomposition

Excess Molar Enthalpies of Methyl Acetate and (1-Propanol, 2-Propanol, 1-Butanol, 2-Butanol, and 1-Pentanol) at T = (298.15 and 308.15) K and P = (5.0 and 10.0) MPa

Numerical Simulation of the Thermal Decomposition of Tert-Butyl Peroxyacetate in Adiabatic Tests

An Adiabatic Calorimeter for Heat Capacity Measurements of Small Samples - the Heat Capacity of Nonlinear Optical Materials Ktiopo4 and Rbtioaso4 Crystals

Kinetic analysis and thermal hazard of 3-chloroperbenzoic acid

Thermokinetic Analysis of the Stability of Acetic Anhydride Hydrolysis in Isothermal Calorimetry Techniques

Thermal Instability and Kinetics Analysis on Triacetone Triperoxide (TATP)

Vapor Heat Capacities of Acetic Acid + 4-Methyl-2-pentanone, at Atmospheric Pressure

A small sample-size automated adiabatic calorimeter from 70 to 580 K - Molar heat capacities of α-Al2O3

Investigation of temperature gradient effects and effective thermal inertia during adiabatic decomposition of substances with varying exothermic characteristics

Non-isothermal Decomposition Kinetics, Specific Heat Capacity and Adiabatic Time-to-explosion of 1-Amino-1-hydrazino-2,2-dinitroethylene (AHDNE)

Thermal Behavior of Pentaerythritol Diazido Dinitrate

Studies on Thermal Decomposition Process and the Non-Isothermal Decomposition Kinetics for Analginum

A Combined Experimental and Theoretical Study of the Thermal Decomposition Mechanism and Kinetics of Ammonium Dinitramide (ADN)

Thermokinetic Studies of Dicumyl Peroxide

Thermodynamic Properties of 3- and 4-Ethoxyacetanilides between 80 and 480 K

Kinetic-parameters-free method of determining autocatalytic decomposition from experimental adiabatic data