Abstract:This paper focuses on the strengthening study of the latent heat thermal energy storage (LHTES) unit and proposes a coupling strengthening method with non-uniform graded metal foam and active rotation. The non-uniform graded metal foams are employed to enhance heat conduction, and the rotation method is selected to make full use of natural convection. The solidification and melting behavior under the coupling effect of non-uniform metal foam and active rotation are numerically analyzed. The aluminum foam is partially concentrated and divided into two parts (concentrated part and diluted part) and is divided into the even-layered or uneven-layered porous structures according to the different regions area. Under the same volume of phase change material (PCM), the effects of layered forms (even-layered and uneven-layered approach), concentrated porosity, concentrated ratio, and rotational speed are performed. It can be concluded that the metal foam should concentrated near the inner tube and the uneven-layered structure can further improve the phase change heat transfer performance compared to the even-layered structure. Moreover, the thermal performance of the LHTES unit improves firstly and then decreases as the concentrated porosity, concentrated ratio, and rotational speed increase. The optimal values are obtained at 0.86 concentrated porosity, 0.3 concentrated ratio, and 0.5 rpm rotational speed. Compared with the static case with uniform metal foam, the melting time, solidification time, and total melting and solidification time can be significantly reduced by 40.30 %, 28.66 %, and 33.18 %, respectively. Similarly, the thermal energy storage rate can be correspondingly increased by 62.57 %, 40.82 %, and 54.11 %, respectively.

Freezing phase change heat transfer of fluid in metallic foams

Experimental Investigation on Thermal Performance of Phase Change Materials–metal Foam Composites in Ocean Thermal Engine

Melting of A Phase Change Material Filled in A Metal Foam: A Visualized Study at the Pore-Scale Using Infrared Imaging

Transient Performance of a Thermal Energy Storage-Based Heat Sink Using a Liquid Metal As the Phase Change Material

Study on the interfacial thermal conductance between metals and phase change materials

Experimental Study on the Thermal Performance of a Finned Metal Foam Heat Sink with Phase Change Material

Design and study of metal foam parameters on whole melting-solidification cycle in phase change heat storage system

Phase change heat transfer in a vertical metal foam-phase change material thermal energy storage heat dissipator

Melting of Phase Change Materials with Volume Change in Metal Foams

Numerical investigation on thermal performance of phase change materials embedded in functionally graded metal foam

Effect of contact thermal resistance and skeleton thermodynamic properties on solid-liquid phase change heat transfer in porous media: A simulation study

Pore-scale investigation on the heat-storage characteristics of phase change material in graded copper foam

Numerical Analysis on a Latent Thermal Energy Storage System with Phase Change Materials and Aluminum Foam

Experimental investigation on the melting behavior of phase change materials in open-cell metal foams in an inclined rectangular enclosure

Numerical simulation on thermal behavior of partially filled metal foam composite phase change materials

Heat Transfer Analysis for Open Cell Metallic Foams

Numerical and optimization study on heat storage and release process of novel fin-metal foam composite structures under periodic heat source

The impact of random porosity distribution on the composite metal foam-phase change heat transfer for thermal energy storage

Experimental and Numerical Studies on Melting/solidification of PCM in a Horizontal Tank Filled with Graded Metal Foam

Numerical study of solidification and melting behavior of the thermal energy storage system with non-uniform metal foam and active rotation

Thermal effect of nanoparticles on the metal foam composite phase change material: A pore-scale study