Abstract:This study employs time-resolved particle image velocimetry technology to investigate the flow field characteristics of a double-wall jet structure under both stationary and rotating conditions. The jet rotation number range from 0 to 0.08, covering both clockwise and counterclockwise rotations, with a jet Reynolds number of 4000. The dimensionless jet-to-target spacing is 2. In order to elucidate the flow mechanisms based on experimental results and provide complementary insight, validated numerical simulations under conditions identical to the experiments were conducted. This paper considers average velocity and Reynolds stress and utilizes the proper orthogonal decomposition method to study flow characteristics. The results indicate that the rotation-induced Coriolis force, centrifugal force, and radial pressure gradient in the radial direction influence the jet to deflect. The pressure gradient generated by the centrifugal force weakens its effect, making the jet deflection primarily dominated by the Coriolis force. The deflection direction and degree of the jet differ with the rotation direction and increase with the rotation number. When the rotation direction is reversed, differences in the direction of the force acting on the fluid lead to variations in the secondary flow structures of the jet; the secondary flow structures within the impingement holes exhibit two-vortex or four-vortex structures under counterclockwise or clockwise rotation, respectively. At the highest rotation number, jet deflection intensifies mixing with the surrounding fluid, resulting in a reduction of about 30% in the velocity peak compared to the stationary state but an increase of approximately 0.6 times in turbulent kinetic energy.

Experimental Research and Numerical Simulation of Asymmetric Impinging Streams

NUMERICAL SIMULATION OF LAMINAR SQUARE IMPINGING JET FLOWS

Flow Simulation and Experimental Study of a Dynamic Asymmetric Impinging Stream

Three-Dimensional Simulation of Turbulent Rectangular and Square Impinging Jet Flows

Numeric Simulation of the Flow Field in Four Opposed Impinging Jets

Numerical simulation on three-dimensional subsonic impinging jet

Experimental and numerical study on stagnation point offset of turbulent opposed jets

Numerical study of particle behavior in laminar axisymmetric opposed-jet flows

Experimental Investigation of Local and Average Heat Transfer Coefficients under an Inline Impinging Jet Array, Including Jets with Low Impingement Distance and Inclined Angle

Experimental study of oscillation of axisymmetric turbulent opposed jets with modulated airflow

Effect of the Nozzle Geometry on Flow Field and Heat Transfer in Annular Jet Impingement

Numerical Study of the Flow and Heat Transfer of a Rectangular-tube Turbulent Impinging Jet Flow

Numerical Study on Flow and Heat Transfer Characteristics of 3D Turbulent Impinging Jets

Experimental and Numerical Studies on Flow and Turbulence Characteristics of Impinging Stream Reactors with Dynamic Inlet Velocity Variation

Study on the Radial Jet Velocity Distribution of Two Closely Spaced Opposed Jets

Stagnation Point Offset of Two Opposed Jets

Numerical Simulation on Streamer Discharge of Short Air Gap of Atmospheric Air

Numerical Simulation of Spray in Crossflow of Liquid Jet into Air Stream

Experimental and numerical studies on multi-jet impingement flow characteristics in a double-wall structure under rotating conditions

Numerical Study On Flow And Heat Transfer Characteristics Of Jet Impingement

Numerical simulation of jet impact process with different jet velocities in a negative pressure ambient