Abstract:The impinging jet is a complex heat and mass transfer technique that involves several process variables, such as the jet Reynolds number, impingement distance, and jet configuration. In this study, the flow characteristics of a semi-confined circular-pipe impinging jet over different Reynolds numbers and impingement distances were experimentally investigated using a two-dimensional particle image velocimetry technique. The confinement was achieved by positioning a plate parallel to the impinging plate at the nozzle exit. The time-averaged velocity field exhibited a recirculation structure that gradually shifted downstream with increasing Reynolds numbers or impingement distances. Notably, at H/d = 2, this downstream shift of the structure was accompanied by an increase in the vortex intensity. Moreover, the confined plate induced alterations in the overall flow pattern within the confined region, significantly reducing the wall jet decay rate compared with both unconfined and confined radial wall jets for H/d ≥ 3. Conversely, the confinement did not affect the expansion of the wall jet. Unlike the free (unconfined) impinging jets, the semi-confined circular-pipe impinging jet did not exhibit self-similar behavior in the conventional outer-scaled coordinates, particularly concerning the turbulence intensity and Reynolds shear stress. Finally, self-similarity in the time-averaged velocity and various turbulence parameters was achieved using the parameter scale proposed in this study, thereby obtaining the corresponding scaling laws in the wall jet region. Our study results can deepen the current understanding of the flow characteristics of semi-confined circular-pipe impinging jets and are significant for optimizing the performance and efficiency of compact electronic packaging equipment.

NUMERICAL SIMULATION OF LAMINAR SQUARE IMPINGING JET FLOWS

Three-Dimensional Simulation of Turbulent Rectangular and Square Impinging Jet Flows

Numerical Study on Flow and Heat Transfer Characteristics of 3D Turbulent Impinging Jets

Numerical Simulation of the Performance of the Sc-89 Jet Impact System

Quadrature Method of Moments for Nanoparticle Coagulation and Diffusion in the Planar Impinging Jet Flow

Numerical Study of the Flow and Heat Transfer of a Rectangular-tube Turbulent Impinging Jet Flow

Numerical simulation on three-dimensional subsonic impinging jet

The initial flow structures and oscillations of an underexpanded impinging jet

Modelling Of Impinging Flow And Heat Transfer In A Confined Narrow Gap

Numerical simulation of unsteady characteristics of large flow rate jet interference

Flow characteristics in a semi-confined circular-pipe impinging jet

Numerical Simulation of Turbulence Modulation by Cylindrical Particles in Round Jet

Experimental Study on Gas-Liquid Flow Characteristics of Submerged Air Jets

Numerical and Experimental Investigation of the Influence of Backpressure on a Confined Impinging Jet for Small Nozzle-to-plate Spacing

Experimental and numerical studies on multi-jet impingement flow characteristics in a double-wall structure under rotating conditions

Analysis of the three-dimensional swirling and non-swirling jet impingement using a turbulence model with cross-diffusion correction

Numerical simulation of jet impact process with different jet velocities in a negative pressure ambient

Numerical simulation under-expanded supersonic impinging jet

Effect of the Nozzle Geometry on Flow Field and Heat Transfer in Annular Jet Impingement

Experimental and Numerical Investigations of Extended Jet Effects on Multiple-Jet Impingement Heat Transfer Characteristics

Numerical Study on Stagnation Point Heat Transfer by Jet Impingement in A Confined Narrow Gap