Abstract:The reduction of nitric oxide using ammonia combined with methane and pulverized coal additives has been studied in a drop tube furnace reactor. Simulated flue gas with 1000 ppm NO(x) and 3.4% excess oxygen was generated by cylinder gas. Experiments were performed in the temperature range of 700-1200 degrees C to investigate the effects of additives on the DeNO(x) performance. Subsequently, a kinetic mechanism was modified and validated based on experimental results, and a computational kinetic modeling with CHEMKIN was conducted to analyze the secondary pollutants. For both methane and pulverized coal additives, the temperature window is shifted towards lower temperatures. The appropriate reaction temperature is shifted to about 900 and 800 degrees C, respectively with 1000 ppm methane and 0.051 g min(-1) pulverized lignite coal. The addition of methane and pulverized coal widens the temperature window towards lower temperature suggesting a low temperature application of the process. Furthermore, selective non-catalytic reduction (SNCR) reaction rate is accelerated evidently with additives and the residence time to complete the reaction is shortened distinctly. NO(x) reduction efficiency with 80% is achieved in about 0.3s without additive at 1000 degrees C. However, it is achieved in only about 0.2s with 100 ppm methane as additive, and only 0.07 and 0.05s are needed respectively for the cases of 500 and 1000 ppm methane. The modified kinetic modeling agrees well with the experimental results and reveals additional information about the process. Investigation on the byproducts where NO(2) and N(2)O were analyzed by modeling and the others were investigated by experimental means indicates that emissions would not increase with methane and pulverized coal additions in SNCR process and the efficacious temperature range of SNCR reaction is widened approximately with 100 degrees C.

Absorption Reactivity of Soot with Nitric Oxide

Chemical Suppressive Effect of Ammonia Addition on Soot Formation in Laminar Diffusion Flames

Effects of Adsorbed and Gaseous NOx Species on Catalytic Oxidation of Diesel Soot with MnOx–CeO2 Mixed Oxides

Performance of soot oxidation by O 2 /NO/N 2 atmosphere in various catalyst species

Diesel soot combustion in air-NO environment: Evolution of functional groups on soot surfaces

Revealing the boosting role of NO for soot combustion over CeO2(111): A first-principles microkinetic modeling

Interactions in NOX chemistry during fluidized bed co-combustion of residual biomass and sewage sludge

Promoting Soot Combustion Efficiency by Strengthening the Adsorption of NOx on the 3DOM Mullite Catalyst

A comprehensive study of char reaction kinetics: Does CO always promote NO reduction on char surface?

Experimental study on NOx emission characteristics under oxy-fuel combustion

Coal-Derived Soot Behaviors in O2/N2 and O2/CO2 Atmospheres, Studied Through a 1-D Transient Coal Combustion Model

The Formation of N2O During the Reduction of NO by NH3

Influence of Nox on Soot Oxidation Catalyzed by La1-xMxMnO3

Effect of Reaction Conditions on Nitrogen Conversion During Char-O2/NO Combustion

Size effect of Pt nanoparticles in acid-assisted soot oxidation in the presence of NO

Experimental and kinetic studies on NO emission during pulverized coal preheating-combustion process with high preheating temperature

Experimental and Kinetic Study on the Influence of CaO on the N2O + NH3 + O2 System

Decomposition of Nitrous Oxide over a Low‐cost Catalyst

Experimental and Modeling Study of the Effect of CH(4) and Pulverized Coal on Selective Non-Catalytic Reduction Process.

Theoretical and Experimental Insights into the Effects of CO2 on the Heterogeneous NO Reduction over Char Surface: Gasification and CO2-mediated Oxygen Rearrangement

Experimental study on combustion and NO formation characteristics of semi-coke