Hierarchical Porous K-OMS-2/3DOM-m Ti 0.7 Si 0.3 O 2 Catalysts for Soot Combustion: Easy Preparation, High Catalytic Activity, and Good Resistance to H 2 O and SO 2
Xuehua Yu,Yu Ren,Di Yu,Maozhong Chen,Lanyi Wang,Ruidan Wang,Xiaoqiang Fan,Zhen Zhao,Kai Cheng,Yongsheng Chen,Joanna Gryboś,Andrzej Kotarba,Zbigniew Sojka,Yuechang Wei,Jian Liu
DOI: https://doi.org/10.1021/acscatal.1c00748
IF: 12.9
2021-04-22
ACS Catalysis
Abstract:Soot particles are recognized as one of the main sources of air pollution; therefore, it is an urgent need to eliminate them from the air effectively. Catalytic combustion is a promising strategy for soot abatement, yet the development of highly efficient catalysts is still an important challenge for practical applications. In this study, novel hierarchical porous K-OMS-2/3DOM-m Ti<sub>0.7</sub>Si<sub>0.3</sub>O<sub>2</sub> catalysts, in which the Ti<sub>0.7</sub>Si<sub>0.3</sub>O<sub>2</sub> supports contain ordered macropores and mesopores and the K-OMS-2 active phase contains micropores, were purposefully designed and successfully prepared using a simple method. The macropores and mesopores in the as-prepared catalysts were formed by PMMA and P123 as templates, and the micropores were brought about by K-OMS-2, a specific crystal form of cryptomelane. The K-OMS-2/3DOM-m Ti<sub>0.7</sub>Si<sub>0.3</sub>O<sub>2</sub> catalysts exhibit high catalytic activity for soot combustion, along with high stability and good resistance to sulfur and water. Among the synthesized catalysts, K-OMS-2/3DOM-m Ti<sub>0.7</sub>Si<sub>0.3</sub>O<sub>2</sub>-450 shows the highest catalytic activity with <i>T</i><sub>10</sub>, <i>T</i><sub>50</sub>, and <i>T</i><sub>90</sub> values of 288, 333, and 364 °C, respectively. This catalyst also exhibits good stability after five catalytic cycles with <i>T</i><sub>10</sub>, <i>T</i><sub>50</sub>, and <i>T</i><sub>90</sub> values in the range of 290 ± 4, 335 ± 4, and 368 ± 4 °C, respectively. The excellent catalytic performance in soot combustion associated with high NO oxidation activity is attributed to the hierarchical pore effect, a synergistic effect between K and Mn, as well as to doping with Ti. Molecular density functional theory (DFT) and thermodynamic modeling indicated that both Langmuir–Hinshelwood and Eley–Rideal mechanisms may operate in the NO to NO<sub>2</sub> oxidation on the K-OSM-2 surface, yet the former is energetically slightly more preferred. Because of their easy synthesis, low cost, high activity, good stability, and good resistance to sulfur and water, the developed optimal K-OMS-2/3DOM-m Ti<sub>0.7</sub>Si<sub>0.3</sub>O<sub>2</sub> catalysts are promising for practical applications in soot combustion filters.The Supporting Information is available free of charge at <a class="ext-link" href="/doi/10.1021/acscatal.1c00748?goto=supporting-info">https://pubs.acs.org/doi/10.1021/acscatal.1c00748</a>.Experimental details on synthesis of 3DOM-m SiO<sub>2</sub> and powdered Ti<sub>0.7</sub>Si<sub>0.3</sub>O<sub>2</sub>; details of the calculation method; experimental steps for presulfurization and stability of catalysts; catalytic activity, XRD, and Raman spectroscopy results for the measurements of catalyst stability under a SO<sub>2</sub> atmosphere; and calculation results about oxygen vacancy formation energies, adsorption energy, and reaction profiles (<a class="ext-link" href="/doi/suppl/10.1021/acscatal.1c00748/suppl_file/cs1c00748_si_001.pdf">PDF</a>)This article has not yet been cited by other publications.
chemistry, physical