Abstract:As an alternative fuel for diesel engines , dimethoxymethane (DMM) has attracted wide attention in recent years, but its impact on the post-treatment process of diesel exhaust particles has been rarely studied. To get a better understanding of the oxidation kinetics of soot in diesel particulate filters (DPFs), the oxidation process of soot emitted from a modern compression ignition (CI) fueled by diesel (D100) and its blend with 11 vol% dimethoxymethane (DMM11) at the same working conditions were investigated by a thermogravimetric analyzer in the air and air-NO atmospheres in this study, respectively. Soot samples at different oxidation degrees (0 %, 20 %, 50 % and 80 % mass loss) were tested by a high-resolution transmission microscopy to characterize the variations of physical properties (morphology, fractal dimension, primary particle diameter and nanostructure) and oxidation-induced fragmentation properties over the oxidation process. The results showed that DMM11 soot had higher oxidation reactivity than D100 soot, and the oxidation reactivity of soot was enhanced by NO involved in the air atmosphere. During the oxidation process, the fractal dimension of D100 and DMM11 soot aggregates gradually increased, and the number and diameter of the primary particles in an aggregate became smaller. This variation trends became more obvious with the presence of NO in the air environment. The nanostructures of D100 and DMM11 soot particles gradually become ordered (characterized by longer fringe length, narrower separation distance and less tortuosity) as the oxidation proceeds. While, when NO added in the air atmosphere the possibility of microcrystals oxidation inside the particles decrease to slow down the getting-ordered rate of soot. Moreover, the fragmentation probability of D100 and DMM11 soot aggregates decreases gradually as oxidation proceeds. During the oxidation process, the probability of primary particle fragmentation for D100 soot increases continuously, while the probability of DMM11 primary soot particles fragmentation showed an increase-then-decrease trend. Compare with D100 soot, DMM11 soot are more likely to occur the fragmentation behavior over the oxidation process. It is worth noting that the addition of NO to the air atmosphere increases the possibility of aggregate fragmentation, while it decreases the possibility of primary particle fragmentation. This work can provide theoretical basis for the development of high efficiency purification technology for diesel exhaust particles.

Diesel soot combustion in air-NO environment: Evolution of functional groups on soot surfaces

Investigation of the Physicochemical Properties of Soot Subjected to Non-Catalytic and CeO2-catalytic Aging under Sequential Aerobic and Anaerobic Exhaust-Like Conditions Simulating the Transition from Engine Operation to Cessation

Diesel soot combustion in air-NO environment: Evolution of soot physical properties and fragmentation characteristics

Mechanism of accelerating soot oxidation by NO2 from diesel engine exhaust

Reaction Mechanism for NO Oxidation on the Soot Surface Using a Quantum Chemistry

An Experimental Investigation of Diesel Soot Thermal-Induced Oxidation Based on the Chemical Structure Evolution

Characterization of the NO-soot combustion process over La 0.8 Ce 0.2 Mn 0.7 Bi 0.3 O 3 catalyst

Performance of soot oxidation by O 2 /NO/N 2 atmosphere in various catalyst species

Experimental investigation of diesel soot oxidation reactivity along the exhaust after-treatment system components

Study on the morphology, nanostructure and fragmentation properties of diesel and diesel-DMM soot particles oxidized in the air/air-NO environment

Oxidation-induced Variations in the Physical and Fragmentation Characteristics of Exhaust Soot from DMC-diesel Blend: Effect of NO Presence in the Air Atmosphere

Research on Diesel Soot Oxidation Process and Chemical Reaction Kinetic Parameters in O2 and NO2 Environment

Promoting Soot Combustion Efficiency by Strengthening the Adsorption of NOx on the 3DOM Mullite Catalyst

Oxidation Evolutions of Soot Surface and Pore Properties with Different O2-NO2 Mixtures and Temperatures

Effects of Adsorbed and Gaseous NOx Species on Catalytic Oxidation of Diesel Soot with MnOx–CeO2 Mixed Oxides

Aliphatic C–H and Oxygenated Surface Functional Groups of Diesel In-Cylinder Soot: Characterizations and Impact on Soot Oxidation Behavior

Oxidation of model soot over MnOx and CeO2 catalysts in the presence of NO

Insight into the Mechanism and Kinetics of the Heterogeneous Reaction between SO2 and NO2 on Diesel Black Carbon under Light Irradiation

Soot particles undergo in-cylinder oxidation again via EGR recirculated gas: Analysis of exhaust soot particle characteristics

Degreening Effect During NO Oxidation over Pt/Al2O3 Catalyst

Revealing the boosting role of NO for soot combustion over CeO2(111): A first-principles microkinetic modeling