Abstract:A large amount of Cr (VI)-polluted wastewater produced in electroplating, dyeing and tanning industries seriously threatens water ecological security and human health. Due to the lack of high-performance electrodes and the coulomb repulsion between hexavalent chromium anion and cathode, the traditional DC-mediated electrochemical remediation technology possesses low Cr (VI) removal efficiency. Herein, by modifying commercial carbon felt (O-CF) with amidoxime groups, amidoxime-functionalized carbon felt electrodes (Ami-CF) with high adsorption affinity for Cr (VI) were prepared. Based on Ami-CF, an electrochemical flow-through system powered by asymmetric AC was constructed. The mechanism and influencing factors of efficient removal of Cr (VI) contaminated wastewater by an asymmetric AC electrochemical method coupling Ami-CF were studied. Scanning Electron Microscopy (SEM), Fourier Transform Infrared (FTIR), and X-ray photoelectron spectroscopy (XPS) characterization results showed that Ami-CF was successfully and uniformly loaded with amidoxime functional groups, and the adsorption capacity of Cr (VI) was more than 100 times higher than that of O-CF. In particular, the Coulomb repulsion effect and the side reaction of electrolytic water splitting were inhibited by the high-frequency anode and cathode switching (asymmetric AC), the mass transfer rate of Cr (VI) from electrode solution was increased, the reduction efficiency of Cr (VI) to Cr (III) was significantly promoted and a highly efficient removal of Cr (VI) was achieved. Under optimal operating conditions (positive bias 1 V, negative bias 2.5 V, duty ratio 20%, frequency 400 Hz, solution pH = 2), the asymmetric AC electrochemistry based on Ami-CF can achieve fast (30 s) and efficient removal (>99.11%) for 0.5–100 mg·L−1 Cr (VI) with a high flux of 300 L h−1 m−2. At the same time, the durability test verified the sustainability of the AC electrochemical method. For Cr (VI)-polluted wastewater with an initial concentration of 50 mg·L−1, the effluent concentration could still reach drinking water grade (<0.05 mg·L−1) after 10 cycling experiments. This study provides an innovative approach for the rapid, green and efficient removal of Cr (VI) containing wastewater at low and medium concentrations.

Electrochemical Decolorization of Amaranth Solution on ACF Electrode under Galvanostatic Model

Fabrication of a novel gas diffusion electrode (g-C 3 N 4 /CB/PTFE-GF) for electro-Fenton treatment of amaranth dye

Mineralization of an Azo Dye Acid Red 14 by Electro- Fenton'S Reagent Using an Activated Carbon Fiber Cathode

Kinetics of Decolorization of Azo Dye by Bipolar Pulsed Barrier Discharge in a Three-Phase Discharge Plasma Reactor.

The Electrochemical Character During the Decolorization Processes of Azo Dyes by a Halomonas Sp. GYW

Degradation of azo dye Acid Red 14 in aqueous solution by electrokinetic and electrooxidation process.

Asymmetric Alternative Current Electrochemical Method Coupled with Amidoxime-Functionalized Carbon Felt Electrode for Fast and Efficient Removal of Hexavalent Chromium from Wastewater

Fabrication of a SnO2-Sb electrode with TiO2 nanotube array as the middle layer for efficient electrochemical oxidation of amaranth dye

A Preliminary Study of Anaerobic Treatment Coupled with Micro-Electrolysis for Anthraquinone Dye Wastewater

[Effect of Cathode Material on Electrolytic Treatment of Acid Orange 7 by a Three-Phase Three-Dimensional Electrode Reactor].

Electrochemical generation of hydroxyl radicals for acid red B degradation by activated carbon fiber electrodes

Electrolytic Treatment of C.I. Acid Orange 7 in Aqueous Solution Using a Three-Dimensional Electrode Reactor

Mineralization Of An Azo Dye Acid Red 14 By Photoelectro-Fenton Process Using An Activated Carbon Fiber Cathode

Policy gradient methods with model predictive control applied to ball bouncing

Electrochemical removal of acid red 18 dye from synthetic wastewater using a three-dimensional electrochemical reactor

Catalytic decolorization of azo-stuff with electro-coagulation method assisted by cobalt phosphomolybdate modified kaolin.

Electro-Fenton method for the removal of methyl red in an efficient electrochemical system

Process Optimization of Electrochemical Oxidation of Ammonia to Nitrogen for Actual Dyeing Wastewater Treatment

Integrated electrochemically enhanced adsorption with electrochemical regeneration for removal of acid orange 7 using activated carbon fibers

Removal of Acid Orange 7 in simulated wastewater using a three-dimensional electrode reactor: removal mechanisms and dye degradation pathway.

A Novel Method for Efficient Electrochemical Treatment of Actual Dyeing Wastewater With Energy Saving