Abstract:In this experimental study, the effect of five important independent variables, for example, solution pH, persulfate concentration, electrode potential, granular activated carbon (GAC) mass, and retention time on the removal efficiency of acid blue 113 (AB113) dye in 3D/EPS (electro persulfate process) process was evaluated and optimized using response surface methodology along with the central composite design. All electrochemical reactions were performed in a Plexiglass reactor (with a useful volume of 250 mL) equipped with graphite anode and stainless steel cathode electrodes and activated carbon as the third electrode (Third dimension). According to the results of the analysis of variance (P > F-value <0.0001) and Fit statistic (Rad 2 j = 0.9953), the proposed quadratic model for removal of AB113 had suitable adequacy and accuracy. The optimum conditions for dye removal, with maximum efficiency of 90.51%, were pH of 5.50, persulfate concentration of 22.59 mM, the electrode potential of 15 V, the retention time of 24.99 min, and GAC of 12.5 g. The dye removal efficiencies through the application of persulfate, electrochemical, and 2D electro persulfate processes under the same conditions were obtained to be 5.4%, 42.6%, and 70.25%, respectively. The results of scanning electron microscopy and X-ray diffraction analyses of the surface of activated carbon after the reaction show that intermediate compounds produced can be retained on the porous surface and increase the dye removal efficiency. The most important intermediates produced, with the lowest molecular mass, were oxalic acid (C2H2O4), malonic acid (C3H4O4), naphthalene-1, and 4-diamine (C10H10N2). According to the results, the rate of total organic carbon reduction was 85% at the end of 75 min. According to the obtained results, this process, in a short time, can be considered as an advanced electrochemical oxidation method. It can also be used for the treatment of colored wastewater such as textile wastewater.

Electrochemical removal of acid red 18 dye from synthetic wastewater using a three-dimensional electrochemical reactor

Optimization of the Acid blue 113 dye degradation in the three-dimensional electro persulfate process (3D/EPS) catalyzed by granular activated carbon (GAC) using the response surface methodology

TiO2-SiO2/GAC Particles for Enhanced Electrocatalytic Removal of Acid Orange 7 (AO7) Dyeing Wastewater in a Three-Dimensional Electrochemical Reactor

Decolorization of Dye Wastewater with Three-Dimensional Electrode Reactor

Removal of Acid Orange 7 in simulated wastewater using a three-dimensional electrode reactor: removal mechanisms and dye degradation pathway.

Multiple Response Optimization for High Efficiency Energy Saving Treatment of Rhodamine B Wastewater in a Three-Dimensional Electrochemical Reactor.

Degradation of azo dye Acid Red 14 in aqueous solution by electrokinetic and electrooxidation process.

Electrochemical treatment of alizarin red S dye wastewater using an activated carbon fiber as anode material

Advanced Treatment of Wet-Spun Acrylic Fiber Manufacturing Wastewater Using Three-Dimensional Electrochemical Oxidation

Electrolytic Treatment of C.I. Acid Orange 7 in Aqueous Solution Using a Three-Dimensional Electrode Reactor

Removal of Formic Acid from Wastewater using Three-Phase Three-Dimensional Electrode Reactor

Electrochemical oxidation of C.I. Acid Red 73 wastewater using Ti/SnO 2 -Sb electrodes modified by carbon nanotube

Research on removal of azo dye by bioelectrochemical technology

Sequential reduction/oxidation of azo dyes in a three-dimensional biofilm electrode reactor

Refinery Wastewater Treatment by a Novel Three-Dimensional Electrocoagulation System Design

Enhanced Treatment of Pharmaceutical Wastewater by Combining Three-Dimensional Electrochemical Process with Ozonation to in Situ Regenerate Granular Activated Carbon Particle Electrodes

Removal Efficiency of Acid Red 18 Dye from Aqueous Solution Using Different Aluminium-Based Electrode Materials by Electrocoagulation Process

Azo dye removal in a membrane-free up-flow biocatalyzed electrolysis reactor coupled with an aerobic bio-contact oxidation reactor.

Feasibility Study of the Decolorization of Simulated Rhodamine B Dye Wastewater with a Three-dimensional Electrode Reactor

Efficient Azo Dye Removal in Bioelectrochemical System and Post-Aerobic Bioreactor: Optimization and Characterization

Electrolytic Treatment of Simulative Wastewater Containing Acid Orange 7 Using a Three-phase Three-dimensional Electrode Reactor