Abstract:Reactive red 2 (RR2) azo dye wastewater poses a serious hazard to the water environment health, so using a novel and efficient Electro- Ce(III) (E- Ce(III)) process takes on a critical significance in treating RR2 dye wastewater. In this study, the effects of a variety of single-factor conditions on RR2 removal efficiency were evaluated in depth. The results indicated that the optimal experimental conditions are as reaction temperature of 25 °C, Na2SO4 concentration of 25 mM, Ce(III) concentration of 0.3 mM, pH of 4.0, and current density of 40.0 mA/cm2. When the RR2 dye wastewater was treated for 40 min under the optimal experimental conditions, a high removal rate of 99.8% for RR2 was obtained. It is suggested that the background ion PO43- in the dye wastewater inhibits the E-Ce (III) process, whereas Cl- facilitates this process. Moreover, the yield of Ce(IV) increases with the increase of the current density. At the current density of 40.0 mA/cm2, a reasonable energy consumption of 3.85 kW h/gTOC for the process was obtained after the 3-h treatment. The effects of different degradation processes (including Direct Electrooxidation (DEO), single Ce(III), and E-Ce (III)) on RR2 removal efficiency and TOC change were compared. The types of oxidizing substances in the E-Ce (III) process were detected, and the mechanism of RR2 oxidative degradation in the E-Ce (III) process was summarized. The result suggests that the E-Ce (III) process has low power consumption. Meanwhile, in the E-Ce (III) process, free reactive Ce(IV) with strong oxidation is continuously generated, RR2 can be efficiently degraded. And the continuous cycle transformation between Ce(III) and Ce(IV) maintains the strong oxidation of the process. The contribution of free reactive Ce(IV) and DEO to RR2 degradation was obtained as 58.8% and 39.8%, respectively. The combined effect of Ce(IV) and DEO played a major role in the E-Ce (III) process, while ·OH exhibited a relatively weak effect (nearly 1.4%). RR2 was comprised of 13 major intermediates, and the biodegradability of wastewater was improved significantly after treatment, thus facilitating the further mineralization and biodegradation of the products. The E- Ce(III) process is novel, efficient, and environment-friendly, and has a large market application space, suggesting that it can be applied as an efficient, economic, and sustainable water treatment process.

Catalytic decolorization of azo-stuff with electro-coagulation method assisted by cobalt phosphomolybdate modified kaolin.

Study on the coagulation treatment of activated dye wastewater

Electrocoagulation-Tio2 Photo-Assisted Combined System Applied to Methyl Orange Wastewater Removal

Electro-catalytic Degradation of Methylene Blue Wastewater Assisted by Fe2O3-modified Kaolin

Kinetics study on decolorization of Reactive Red KN-3B by Citrobacter sp. CK3

Sustainable cycling and mechanism of Co(II)/Co(IV)/Co(III) with S(IV) highly triggered by Co(IV) in E/Co(II)/S(IV) for enhanced removal of reactive brilliant red X-3B

Removal of Acid Orange 7 in simulated wastewater using a three-dimensional electrode reactor: removal mechanisms and dye degradation pathway.

Electrochemical removal of RRX-3B in residual dyeing liquid with typical engineered carbonaceous cathodes

Catalytic Ozonation of Reactive Red 195 in Aqueous Solution over a Cobalt/Aluminum Oxide-Ceria Catalyst

Study on the removal of hazardous Congo red from aqueous solutions by chelation flocculation and precipitation flotation process

Degradation of azo dye Acid Red 14 in aqueous solution by electrokinetic and electrooxidation process.

Enhanced Photo–Fenton Removal Efficiency with Core-Shell Magnetic Resin Catalyst for Textile Dyeing Wastewater Treatment

Electrolytic Treatment of C.I. Acid Orange 7 in Aqueous Solution Using a Three-Dimensional Electrode Reactor

Continuous flowing electrocoagulation reactor for efficient removal of azo dyes: Kinetic and isotherm studies of adsorption

Mineralization of an Azo Dye Acid Red 14 by Electro- Fenton'S Reagent Using an Activated Carbon Fiber Cathode

Efficient removal of dyes in water using chitosan microsphere supported cobalt (II) tetrasulfophthalocyanine with H2O2

Functionalization of cellulose nanofiber mats with phthalocyanine for decoloration of reactive dye wastewater

Preparation of novel Fe-containing zeolite-A for KN-R decolorization by Fenton-like reaction

Dyes Wastewater Treatment by Reduction-Oxidation Process in an Electrochemical Reactor Packed with Natural Manganese Mineral.

Efficient removal of RR2 dye by electro- Ce(III) process with its elegant arts and attractive charm in performance, energy consumption and mechanism

Microwave-Assisted Heterogeneous Catalytic Oxidation of High-Concentration Reactive Yellow 3 with Cufe2o4/Pac