Abstract:In this study, with the meso-scale model reliably validated in our previous work (Construction and Building Materials, 2018), the waveform features of plain concrete under various loading conditions and especially with considering stress non-equilibrium are reliably reproduced and predicted. Associating with waveform features, the violation indicator of the specimen stress equilibrium in the split Hopkinson pressure bar test is identified for concrete-like damage softening materials. The concrete material behaviors for stress non-equilibrium are further analyzed, e.g. the dynamic increase factor (DIF) and damage development, etc. The conception of "damage failure volume" is introduced, and a new method of defining the development of concrete dynamic damage is given in the numerical study. What's more, the "compression wave" and "double peak" phenomena observed in the experiment are further interpreted based on the means of numerical simulation. Waveform features how to reflect the concrete material properties is also concluded. The results show that, the disappearance of the "double peak" phenomenon of reflection curve under high strain rate can be regarded as the indicator of the violation of stress equilibrium. After the violation of the stress equilibrium, the relevant DIFs of the concrete specimen will not change significantly. Especially, the concrete specimen will turn into structural response from material response. The conception of "damage failure volume" can well explain the generation of the "double peak" phenomenon of the reflection curve. The "compression wave" phenomenon of reflection curve under lower strain rates is derived from the unloading expansion recovery of the concrete specimen. Furthermore, under the same loading condition, the amplitude of the first peak of the reflection curve can be used as the evaluation standard of the bonding quality between mortar and aggregates.

MESOMECHANICS ANALYSIS OF COMPRESSIVE STRENGTH AND CONSTITUTIVE EQUATION OF WET CONCRETE

Mesoscopic numerical test of crushing process of concrete under uniaxial compression

Meso-mechanism of Effects of Free Water on Mechanical Properties of Concrete under Confined Compression

Mesomechanism of Tensile Strength Reduction and Tension Constitutive Model of Saturated Concrete

EFFECT OF PORE WATER ON THE COMPRESSIVE STRENGTH OF WET CONCRETE

Micro-mechanism of Static and Dynamic Strengths for Saturated Concrete

Damage Based Constitutive Model for Predicting the Performance Degradation of Concrete

Meso-crack evolution based constitutive model for concrete material under compression

Effect of water pressure on mechanical behavior of concrete under dynamic compression state

Experimental and Numerical Investigation on the Tensile Fracture of Compacted Clay

Analysis of Damage and Permeability Evolution of Sandstone under Compression Deformation

Static and Dynamic Meso-Failure-mechanism of Concrete under Confined Compression

Experimental Study and Analytical Formulation of Mechanical Behavior of Concrete

EXPERIMENTS ON SATURATED CONCRETE UNDER DIFFERENT SPLITTING TENSILE RATE AND MECHANISM ON STRENGTH CHANGE

Computational technology for analysis of 3D meso-structure effects on damage and failure of concrete

Mechanical behavior and constitutive model of lining concrete in triaxial compression infiltration process under pore water pressure

Dynamic Constitutive Equations for Concrete Based on Meso-Cracks and a Static Constitutive Model

Numerical analysis of concrete under a wide range of stress and with different saturation condition

Further numerical investigation on concrete dynamic behaviors with considering stress non-equilibrium in SHPB test based on the waveform features

Prediction of Elastic Modulus and Poisson’s Ratio for Unsaturated Concrete

Saturation Effect on Dynamic Tensile and Compressive Strength of Concrete