Abstract:Water permeability of reinforced concrete is essential for transportation of ingress ions inside concrete structures. The coupling effect of permeability and loading presents a challenge for the experimental simulation of water-permeate reinforced concrete subjected to tension. This renders the development of the model based on dimensionless analysis, using a series of experimental tests from an innovative experimental system that allows simultaneous measurement of permeability and crack width. The experiments focused on both ordinary concrete and high strength concrete under tension. The relationship between permeability and variables such as deformation, diameter of rebars, tensile load, and crack width under tension was formulated through multiple regression analysis using the testing data. The load to deformation characteristics determines the permeability of the concrete under tension. The proposed model accounts for the influence of continuous loading on permeability, as demonstrated by the robust analysis and proposed yield effective point. The robust analysis demonstrates that the diameter of the rebar, load, and crack width exert minimal influence on the permeability of concrete at lower significance levels. However, permeability variations become pronounced from 0.5 threshold, with significant changes observed between 0.5 and 0.9 thresholds. The findings indicate a differential impact of the variables on the permeability of concrete under tension. The yield-effective points delineate the relationship between the rebar diameter, load, and crack-width on the permeability of concrete with a threshold of 0.5, 0.5, and 0.58, respectively. At a threshold of 0.78, higher permeability will occur in the concrete, attributed to the prevalence of deformation. This deformation highlights the parameters with the most significant influence on the permeability of concrete under tension. The robust analysis and yield effective point derivative are useful parameters to measure concrete permeability and evaluate the behavior of the permeability model under tension.

Mesomechanism of Tensile Strength Reduction and Tension Constitutive Model of Saturated Concrete

Micro-mechanism of Static and Dynamic Strengths for Saturated Concrete

Damage Based Constitutive Model for Predicting the Performance Degradation of Concrete

Uniaxial Concrete Tension Damage Evolution Using Acoustic Emission Monitoring

MESOMECHANICS ANALYSIS OF COMPRESSIVE STRENGTH AND CONSTITUTIVE EQUATION OF WET CONCRETE

Saturation Effect on Dynamic Tensile and Compressive Strength of Concrete

EXPERIMENTS ON SATURATED CONCRETE UNDER DIFFERENT SPLITTING TENSILE RATE AND MECHANISM ON STRENGTH CHANGE

Meso-mechanism of Effects of Free Water on Mechanical Properties of Concrete under Confined Compression

A new method for determining the tension-softening curve of concrete

Experimental and Numerical Investigation on the Tensile Fracture of Compacted Clay

Degradation mesomechanism of concrete deteriorated by soft water

Dimensionless analysis-based permeability model of reinforced concrete under tension

Research on Constitutive Model on Dynamical Damage to Concrete Under Condition of Direct Tensile

Dynamic Damage Constitutive Model of Concrete in Uniaxial Tension

New concrete cracking model established based on fracture mechanics and damage theory

Mesoscopic modeling and simulation of tensile properties of cracked concrete using cohesive model

Micromechanical Modeling Of Tensile Response Of Elastic-Brittle Materials

Saturated Concrete Elastic Modulus Prediction

Damage Constitutive Model and Mechanical Performance Deterioration of Concrete under Sulfate Environment

A wing-crack extension model for tensile response of saturated rocks under coupled static-dynamic loading

Tensile Creep Model for Concrete Subject to Constant Restraints