Abstract:The DC steady E-field is a state of composite insulation in the converter transformer outlet barrier system. The electrical properties of insulating material are both function of electric stress and temperature, thus, changes of electrical parameters due to temperature gradient will affect the DC steady E-field distribution of composite insulation structure. Based on this, to accurately simulate DC steady E-field of composite insulation structure with temperature gradient, this paper applied nonlinear finite element method to the coupling analysis of these two affecting factors. Firstly, relationship between electrical parameters of insulation materials and temperature, electrical stress was investigated. Then, the DC steady E-field calculation method with nonlinear finite element was proposed and verified by the simple coaxial insulation structure model. Finally, 2D simulation model of barrier system was established to simulate and analyze the DC steady E-field considering nonlinear characteristics of materials. The results show that the results of traditional simulation are quite different from those when considering material nonlinearity. The nonlinear finite element method proposed in this paper and the calculation results provide references for the design of converter transformer outlet barrier system.

Resistance-capacitance Network Simulation of Stress-controlling Composite Structures with Nonlinear Dielectrics

Review of Self-Sensing of Damage and Interfacial Evaluation Using Electrical Resistance Measurements in Nano/micro Carbon Materials-Reinforced Composites

Remote Collaborative Pseudo-dynamic Tests of a Ten-story Concrete Filled Steel Tubular Composite Frame

Experimental Research on a Composite Structure Combined of Cable Dome and Single-Layer Lattice Shell

Application of Nonlinear Resistance and Capacitance Configuration in Ameliorating the Electrical Field Distribution

Compensation Effects of Stress in Nonlinear Conductive Dielectrics Under High Electrical Field

Experimental and Numerical Study on Failure Behaviors of Composite Grid Stiffeners under Tensile and Flexural Loading

Compressive Experiment and Damage Simulation Studies of Composite Structure with Plies Drop-off

Simulation of cantilever-casting construction of prestressed concrete cable-stayed bridge

Efficient, Simulation of Power Distribution Network by Using Integral-Equation and Modal-Decoupling Technology

Experiment and simulations of stiffened panel buckling with composite damage and interfacial delamination

Inspection of defects in conductive multi-layered structures by an eddy current scanning technique: Simulation and experiments

The Optimization of Material and Structure Parameters in Cable Terminations Equipped with Nonlinear Stress Control Tubes Based on Response Surface Method

Simulation of Flexible Net Structure Based on Nonlinear Finite Element Method

Application of nonlinear finite element method in DC steady E-field calculation of composite insulation structure

Study On The Dielectric Property Of Composite Materials Based On Electric Network

Electric Field Simulation of Typical Defects in the Epoxy/Paper Composites Insulated Tubular Bus

Simplified Nonlinear Simulation of Steel–concrete Composite Beams

Experimental Research on A Composite Structure of Cable Dome and Rigid Shell

Finite Element Simulating of Load Effects of CFRP-strengthened RC Beams

Composite Material Dielectric Constant Measuring Device and Method under Stress