Abstract:The electrodeposition behavior of aluminum on TiB2/A356 composite from AlCl3–NaCl–KCl molten salt was studied in this paper. The surface morphology, microstructure, and phase composition of aluminum coating were characterized by scanning electron microscopy (SEM) and energy dispersive spectrometer (EDS). The phase composition of the composite was examined by X‐ray diffraction technique. The polarization curves were measured and the corrosion current densities were obtained. The results indicated that the aluminum coating was preferentially electrodeposited on the surface of TiB2 and Si phases. This phenomenon could be largely attributed to the different surface energies of TiB2, Si, and Al phases. With the increasing of deposition time, a continuous, dense, and faceted aluminum coating was finally obtained. It was inferred that the growth of aluminum coating on the surface of the composite was mainly through two‐dimensional spreading. However, three‐dimensional growth could also be seen. The corrosion current density of the aluminum‐coated TiB2/A356 composite (1 min) decreased by an order of magnitude as compared with that of TiB2/A356 composite, and was close to that of A356 alloy, and also in the same order of magnitude with that of pure aluminum. It is evident that, the coverage of TiB2 and Si phases by aluminum coating (1 min) can effectively improve the corrosion resistance of TiB2/A356 composite. In combination with SEM and EDS results, the behavior can be characterized as preferential electrodeposition.

Titanium diboride and wolfram silicide composite used as aluminum electrolysis inert cathode materials

Titanium diboride and molybdenu silicide composite coating on cathode carbon blocks in aluminum electrolysis cells by atmospheric plasma spraying

Investigation on the Microstructure and Electrochemical Corrosion Properties of TiB2 reinforced aluminum matrix composites

Electrochemical Corrosion Behavior of Al–Si Alloy Composites Reinforced with in Situ TiB2 Particulate

Improved mechanical performance and electrochemical corrosion of WC-Al2O3 composite in NaCl solution by adding the TiC additives

Improved electrochemical corrosion resistance of hot-press sintered WC–Al2O3 composites with added TiC in alkaline solutions

Preparation And Electrochemical Properties Of Al/Tib2/Beta-Pbo2 Layered Composite Electrode Materials For Electrowinning Of Nonferrous Metals

Simultaneously Increasing the Mechanical Properties and Corrosion Resistance of B4C/Al Composites Via Forming “tio2–al” Interfacial Layer

Effect of TiB2 on Microstructure, Mechanical Properties and Oxidation Resistance of TiAl-based Alloys

Simultaneously Increasing the Mechanical Properties and Corrosion Resistance of B4C/Al 4 C/Al Composites Via Forming "Tio2-Al" 2-Al" Interfacial Layer

Improvement in the corrosion resistance of TiB 2/A356 composite by molten-salt electrodeposition and anodization

Study on the Initial Electrodeposition Behavior of Aluminum on Tib2/A356 Composite

Microstructure and high-temperature oxidation behavior of Ti3AlC 2/W composites

Microstructure, Corrosion and Mechanical Properties of TiC Particles/Al-5Mg Composite Fillers for Tungsten Arc Welding of 5083 Aluminum Alloy

The electrodeposition of aluminum on TiB2/A356 composite from ionic liquid as protective coating

Preparation and Characterization of TiB2/Al3Ti/Al2O3 Composite Nano-powder

Effect of Chromium Addition on Microstructure and Corrosion Resistance of A356-5vol.%TiB 2 Composites

A FeCrB-based composite containing multi-scale corrosion-resistant phases: application in high-temperature liquid aluminum corrosion

TiB2-coated cathodes for aluminum smelting cells

Oxidation Resistance of In Situ Reaction/Hot Pressing Synthesized Ti2AlC–20% TiB2 Composite at 600–900 °C in Air

Anodic Oxidation of In-Situ TIB_2 Particle Reinforced 6351 Aluminum Alloy