Abstract:Gibbsite precipitation from sodium aluminate solution was intensified by adding mixed industrial and self-prepared active seeds, and its mechanism was researched preliminarily. The interfacial properties of seed/aluminate solution were determined for separate industrial and active seed. Contact angles of seed/aluminate solution and the specific surface area of seeds were respectively measured by sessile drop and BET method, and the morphology and particle size of precipitates were recorded by SEM and laser diffraction. The results show that, compared with the industrial seed, the active seed has a better wettability, lower interfacial tension, and larger specific surface area, being conducive to enhancing gibbsite precipitation from sodium aluminate solution. SEM analysis of the precipitates indicates that the embedment and accumulation/agglomeration of extremely fine particles on the surface of coarse industrial seed can effectively control the content of fine particles in the precipitation product. With extra 3.1–4.6 g/L active seed, the gibbsite precipitation ratio was increased by 3.23%–3.92%. Moreover, the mass percentage of particles <45 μm in precipitation product has even a slight decrease compared with that for the traditional precipitation product or of the industrial seed itself. The result presented is favorable to developing an intensified gibbsite precipitation process for commercial alumina manufacture.

Experiment of Process Parameters on Bayer Seeds Precipitation from Caustic Aluminate Solutions Added Additives

Effect of modified additives on processes of Bayer seeds precipitation from caustic aluminate solutions

Effects of Mixed Additives on AI(OH)3 Precipitation with Seeds in Bayer Process

Effect of Modified Additives on Process of Seeded Precipitation Ratio of Sodium Aluminate Liquors

Study on the Seed Precipitation of Sodium Aluminate Solution with Polypropylene Lycol As Additive

Effect of mechanically activated seeds on the agglomeration process of supersaturated sodium aluminate liquors

Intensifying Gibbsite Precipitation from Sodium Aluminate Solution by Adding a Mixed Seed

Effects of Temperature and Initial Molar Ratio of Na 2 O to Al 2 O 3 on Agglomeration of Fine Al(OH) 3 Seed in Synthetic Bayer Solution

Intensification of precipitation of gibbsite from seeded caustic sodium aluminate liquor by seed activation and addition of crown ether

Phenomena in Late Period of Seeded Precipitation of Sodium Aluminate Solution

Research of intensifying the process of seeded precipitation from caustic aluminate solutions with surfactants PEG3000

Effects of monohydroxy-alcohol additives on the seeded agglomeration of sodium aluminate liquors

Increasing Precipitation Rate from Sodium Aluminate Solution by Adding Active Seed and Ammonia

Effects of Na4EDTA and EDTA on Seeded Precipitation of Sodium Aluminate Solution

Progress in study of intensifying seed precipitation process of supersaturated sodium aluminate solution

Effect of Ethers Additive B35 on Seeded Precipitation of Sodium Aluminate Solution

Effect of Polymers on Seed Precipitation of Sodium Aluminate Solution

Agglomeration Mechanism of Seed Precipitation Process in Sodium Aluminate Solution

Effect of cationic polyacrylamide on the seeded agglomeration process of sodium aluminate liquors

Combined Effect of Amino and Carboxyl Group in Α-Alanine on Seeded Precipitation of Sodium Aluminate Solution

EFFECT of alpha-ALANINE ON THE SEEDED PRECIPITATION OF SODIUM ALUMINATE SOLUTION