Abstract:The integrated microwave photonic filter (MPF), as a compelling candidate for next-generation radio-frequency (RF) applications, has been widely investigated for decades. However, most integrated MPFs reported thus far have merely incorporated passive photonic components onto a chip-scale platform, while all necessary active devices are still bulk and discrete. Though few attempts to higher photonic integration of MPFs have been executed, the achieved filtering performances are fairly limited, which impedes the pathway to practical deployments. Here, we demonstrate, for the first time to our knowledge, an all-integrated MPF combined with high filtering performances, through hybrid integration of an InP chip-based laser and a monolithic silicon photonic circuit consisting of a dual-drive Mach–Zehnder modulator, a high- Q ring resonator, and a photodetector. This integrated MPF exhibits a high spectral resolution as narrow as 360 MHz, a wide-frequency tunable range covering the S-band to K-band (3 to 25 GHz), and a large rejection ratio of > 40 dB . Moreover, the filtering response can be agilely switched between the bandpass and band-stop function with a transient respond time ( ∼ 48 μs ). Compared with previous MPFs in a similar integration level, the obtained spectral resolution in this work is dramatically improved by nearly one order of magnitude, while the valid frequency tunable range is broadened more than twice, which can satisfy the essential filtering requirements in actual RF systems. As a paradigm demonstration oriented to real-world scenarios, high-resolution RF filtering of realistic microwave signals aiming for interference rejection and channel selection is performed. Our work points out a feasible route to a miniaturized, high-performance, and cost-effective MPF leveraging hybrid integration approach, thus enabling a range of RF applications from wireless communication to radar toward the higher-frequency region, more compact size, and lower power consumption.

A Process Research for Integrated RF Tunable Filter

3D Heterogenous Integrated Wideband Switchable Bandpass Filter Bank for Millimeter Wave Applications

Moving Tunable Filters Forward: A \"heterointegration\" Research Project for Tunable Filters Combining MEMS and RF SAW\/BAW Technologies

Integrated Broadband Filter with Sharp Transition Edges Based on SiN and SiON Composite Waveguide Coupler

Integrated RF MEMS/CMOS Devices

Millimeter-Wave Reflectionless Filters Using Advanced Thin-Film Fabrication

The design and fabrication of RF band pass filter by LTCC technology

Design and Fabrication of a MEMS Bandpass Filter with Different Center Frequency of 8.5-12 GHz.

Design and Experiment Research of Integrated EMI Filter Based on Flexible Multi-Layer Foils

Design and Simulation of 4-Bit 10-14Ghz RF MEMS Tunable Filter

Design and simulation of tunable bandstop filters by integrating RF MEMS shunt switch for K-band applications

A 10&#x2013;14 GHz RF MEMS Tunable Bandpass Filter

Hybrid-integrated High-Performance Microwave Photonic Filter with Switchable Response

Design Of Rf Amplifier With Tunable Active Inductor

Tunable Optical Filter by Thermal Effect Based on MEMS Technology

Tunable and Reconfigurable Bandstop Microwave Photonic Filter Based on Integrated Microrings and Mach–Zehnder Interferometer

A Reconfigurable Si3N4 On-Chip Filter for Programmable Photonic Processor

A Monolithic Integrated Microwave Photonics Filter

Reconfigurable Microwave Filters Implemented Using Field Programmable Microwave Substrate

Design and fabrication of 2.45G miniaturized band pass filter by LTCC technology

Tunable and reconfigurable bandpass microwave photonic filters utilizing integrated optical processor on silicon-on-insulator substrate