Abstract:The present study investigated the microstructure, phase transformation behavior, and functional characteristics of the multicomponent Ti–Ni–Cu–Al–V shape memory alloys with the different annealing treatments. The results indicated that the multicomponent Ti–Ni–Cu–Al–V alloy annealed at 673 K/5 min was primarily composed of the B2 parent phase and Ti2(Ni,Cu) type precipitates distributing along the grain boundaries. As the annealing temperature increased and the annealing time extended, the chemical composition of the matrix changed slightly due to the precipitation of the Ti2(Ni,Cu) phase. Consequently, the martensitic phase (B19) gradually appeared and the volume friction of the martensite phase gradually increased. The phase constituents of the present Ti–Ni–Cu–Al–V shape memory alloy evolved from a B2 austenite phase to a B19 martensite phase with the annealing temperature/time increasing. Additionally, as the annealing temperature and time increased, the grain size also increased. The increment in annealing temperature and the prolongation of annealing time resulted in an increase of martensitic transformation temperatures as a result of the comprehensive effect of chemical composition, grain size, defects’ density, etc. Both yield strength and fracture strength decreased, while the elongation significantly increased (reaching 28% at 1123 K/60 min) with the annealing temperature rising and annealing time prolonging. Under the successively applied prestrain to 8% condition, the recoverable strain decreased from 4.2% to 1.7% for the annealed Ti–Ni–Cu–Al–V shape memory alloy with the annealing temperature/time increasing.

Incomplete Transformation of Ti-Ni-X Ternary Shape Memory Alloy

Temperature Memory Effect Induced by Incomplete Transformation in Tini-Based Shape Memory Alloy

Temperature Memory Effect of Ti-Ni-Cu Shape Memory Alloy

Temperature Memory Effect of Ni47Ti44Nb9 Wide Hysteresis Shape Memory Alloy

Transformation Behaviour with Thermal Cycling in Ti50Ni43Cu7 Shape Memory Alloy

An in Situ TEM Study of the Size Effect on the Thermally Induced Martensitic Transformation in Nanoscale NiTi Shape Memory Alloy

Temperature Memory Effect in CuAlNi Single Crystalline and CuZnAl Polycrystalline Shape Memory Alloys

Effect of Thermal Cycling on Martensitic Transformation Characteristics of (ni47ti44)100−xnbx Shape Memory Alloys

Effect of Heating/Cooling Rate on the Transformation Temperatures in Tinicu Shape Memory Alloys

Martensitic transformations and kinetics in Ti-Ni-Cu-Hf shape memory alloy

Effect of Stoichiometry on Shape Memory Properties of Ti-Ni-Hf-Cu-Nb Shape Memory Alloys Manufactured by Suspended Droplet Alloying

Deformation Dependence of Transformation Behavior of Ti-Ni-Nb Wide Hysteresis Shape Memory Alloy

Time effect of martensitic transformation in Ni43Co7Mn41Sn9

Martensitic Transformation and Shape Memory Effect of NiCoMnSn High Temperature Shape Memory Alloy

Microstructural features, martensitic transformation, and functional properties of multicomponent Ti–Ni based shape memory alloys

Martensitic Transformation and Magnetic Properties of Ti-doped NiCoMnSn Shape Memory Alloy

Effects of Heat Treatment on the Transformation Temperature and the Microstructure of Ni-Ti-Nb Shape Memory Alloy

The Effects of Ti3Ni4 Precipitates on the R-phase Transformation

Transformation Hysteresis and Shape Memory Effect of an Ultrafine-Grained Tininb Shape Memory Alloy

Effects of cooling rate on martensitic transformation behavior and shape memory property for Ni-rich NiTiHf-Nb high-temperature shape memory alloy

Effect of aging on martensitic transformation behavior of Ti<sub>48.8</sub>Ni<sub>50.8</sub>V<sub>0.4</sub> alloy