Abstract:The present study investigated the microstructure, phase transformation behavior, and functional characteristics of the multicomponent Ti–Ni–Cu–Al–V shape memory alloys with the different annealing treatments. The results indicated that the multicomponent Ti–Ni–Cu–Al–V alloy annealed at 673 K/5 min was primarily composed of the B2 parent phase and Ti2(Ni,Cu) type precipitates distributing along the grain boundaries. As the annealing temperature increased and the annealing time extended, the chemical composition of the matrix changed slightly due to the precipitation of the Ti2(Ni,Cu) phase. Consequently, the martensitic phase (B19) gradually appeared and the volume friction of the martensite phase gradually increased. The phase constituents of the present Ti–Ni–Cu–Al–V shape memory alloy evolved from a B2 austenite phase to a B19 martensite phase with the annealing temperature/time increasing. Additionally, as the annealing temperature and time increased, the grain size also increased. The increment in annealing temperature and the prolongation of annealing time resulted in an increase of martensitic transformation temperatures as a result of the comprehensive effect of chemical composition, grain size, defects’ density, etc. Both yield strength and fracture strength decreased, while the elongation significantly increased (reaching 28% at 1123 K/60 min) with the annealing temperature rising and annealing time prolonging. Under the successively applied prestrain to 8% condition, the recoverable strain decreased from 4.2% to 1.7% for the annealed Ti–Ni–Cu–Al–V shape memory alloy with the annealing temperature/time increasing.

Effect of Thermal Cycling on Martensitic Transformation Characteristics of (ni47ti44)100−xnbx Shape Memory Alloys

Transformation Behaviour with Thermal Cycling in Ti50Ni43Cu7 Shape Memory Alloy

Effect of Heating/Cooling Rate on the Transformation Temperatures in Tinicu Shape Memory Alloys

Thermal Cycling Effect In Cu-11.9al-2.5mn Shape Memory Alloy With High M-S Temperature

Stress-Induced Martensitic Transformation in (Ni47ti44)(100-X)nb-x Shape Memory Alloys with Wide Hysteresis

An in Situ TEM Study of the Size Effect on the Thermally Induced Martensitic Transformation in Nanoscale NiTi Shape Memory Alloy

Effect of Nb-Content on Mechanical Properties of (Ni<sub>47</sub>Ti<sub>44</sub>)<sub>100-x</sub>Nb<sub>x</sub> Shape Memory Alloys

Microstructure and Martensitic Transformation of NiTiHfSc High Temperature Shape Memory Alloys

Influence of Nb Content on Martensitic Transformation and Mechanical Properties of Tinicunb Shape Memory Alloys

Effect of aging on martensitic transformation behavior of Ti<sub>48.8</sub>Ni<sub>50.8</sub>V<sub>0.4</sub> alloy

Effects of cooling rate on martensitic transformation behavior and shape memory property for Ni-rich NiTiHf-Nb high-temperature shape memory alloy

Transformation Behavior and Shape Memory Effect of Ti 50− X Ni 48 Fe 2 Nb X Alloys by Aging Treatment

Microstructure and Martensitic Transformation of TiNiNbB Shape Memory Alloys

Effects of Heat Treatment on the Transformation Temperature and the Microstructure of Ni-Ti-Nb Shape Memory Alloy

Martensitic transformations and kinetics in Ti-Ni-Cu-Hf shape memory alloy

Effect of aging on martensitic transformation behavior of Ti 48.8 Ni 50.8 V 0.4 alloy

Microstructural features, martensitic transformation, and functional properties of multicomponent Ti–Ni based shape memory alloys

Microstructure and Thermoelastic Martensitic Transformation in Ni-Low and -Rich Ni–Ti–Hf–Nb Hightemperature Shape Memory Alloys

Effect of niobium content on shape memory characteristics of (Ni47Ti44)(100-x)Nb-x alloys

Regularities in the Evolution of Thermoelastic Martensitic Transformations during Cooling/Heating in the Free State and under Load of Titanium Nickelide Alloyed with Niobium

Temperature Memory Effect Induced by Incomplete Transformation in Tini-Based Shape Memory Alloy