Abstract:Laser-powder interaction and molten pool evolution are two main physical processes in laser-based directed energy deposition (L-DED), which greatly affect the morphology and quality of the deposition layer. In this research, a comprehensive three-dimensional analytical-numerical model which integrates a laser-powder interaction model and material deposition model is developed to study the multi-physics coupling characteristics in L-DED process. The concentration of the powder stream is modeled based on conservation of mass and is in good agreement with the experimental result which is captured by high-speed camera. The effects of main parameters, including laser power, powder feeding rate, powder feeding angle and defocus length on the laser attenuation and the temperature distribution of the in-flight powder particles are analyzed. The results show that the laser attenuation rate increases from 0.72% to 1.36% with the powder feeding angle increasing from 45 deg. to 65 deg-. However, the laser attenuation rate is almost the same with the defocus length of 25 mm, 35 mm and 45 mm. Moreover, the peak powder temperature on the deposition surface increases with the increase of powder feeding angle and decrease of defocus length. Accordingly, the heat and mass input conditions at the molten pool surface for the material deposition model, including powder mass flux, effective laser intensity and powder temperature are obtained from the laser-powder interaction model. The heat transport and fluid dynamics of the molten pool are discussed based on the calculated results from material deposition model. Finally, the calculated molten pool geometry shows good agreement with the experimental results with the relative error <8.5%. This work is helpful in process optimization from the point of view of adjusting the parameters related to the powder stream and deeper understanding of laser-powder interaction and molten pool evolution during the L-DED process.

INVESTIGATION ON DEPTH OF HEAT AFFECTED ZONE OF DISCHARGE SPOT BY HIGH REPETITIVE RATE YAG LASER-INDUCED DISCHARGE TEXTURING

Investigation on Crater Morphology by High Repetitive Rate YAG Laser-Induced Discharge Texturing

The YAG laser texturing technology and application with controllable disorder distribution

Investigation on Laser Etch-Machining Underwater Based on Thermal-Mechanical Effect

Affected Characteristics Analysis of the Pulsed Laser Forming of Metal Sheet

Laser micro-texture formation mechanism based on modified heat-mass transfers and hydrodynamic models

Influence of Laser Induced Plasma on Material Removal in Micro-Drilling Underwater

Influence of Pulse Duration on the Surface Morphology of Assab Df-2 (Aisi-01) Cold Work Steel Treated by Yag Laser

Surface Texturing with Laser Multiple-Spot Scanning Technology

Experimental Study on Laser Microstructures Using Long Pulse

Laser Texturing of Rolled Surfaces

Investigation on coaxial visual characteristics of molten pool in laser-based directed energy deposition of AISI 316L steel

Reducing the Rebound Effect in Microscale Laser Dynamic Forming through Multi-Pulse Laser Shock Loading

Studies on Geometric Morphologies of Micro Dimples Fabricated by High Strain Rate Laser Shock Processing

Effects of Pulsing Parameters on Weld Shape Parameters During Pulsed Nd-YAG Laser Welding of Aluminum Alloys

Laser texturing of rollers by pulsed Nd:YAG laser

Investigation of thermal and fluid dynamics behaviors of melt pool during laser direct metal deposition on inclined substrates

Experimental and numerical investigation of laser-assisted electrodeposition based on amorphous forming: Laser-electrodeposition correlation and explanation of enhancing mechanism

Determination of Process Window for Laser Peening of Thin Metal Sheets by Localized Indentation Analysis

Investigation of thermal behavior of powder stream and molten pool during laser-based directed energy deposition

Integrated Control of Thermal Residual Stress and Mechanical Properties by Adjusting Pulse-Wave Direct Energy Deposition