Abstract:PurposeThe micro-vibrations of some flexible appendages onboard satellite such as reaction wheels, scanning mechanisms etc, will severely influenced the optical precision of the imager. To guarantee the imager orientation accuracy of high resolution satellite, this study focused on designing an isolation system to attenuate the influences of on orbit micro-vibration.MethodsStwart configuration is employed to construct the reaction wheel isolation system which contains six single isolators. A launch environment damper is designed to guarantee the structure safety of isolators without lock mechanisms at launching term which simplify the whole isolation system. The imager isolation system is composed of three special springs which are placed between imager basement and roof board of the satellite to isolate the disturbances to the imager. Both isolation systems are compose together for the satellite to attenuate the influences of on orbit micro-vibration.ResultsExperiments are designed to validate the productivity of the micro-vibration isolation system both in component and satellite level. The sine vibration experiment results show that the maximal acceleration output 34.61g is much lower than the flywheel design value 49g which guarantees the safety of flywheel under harsh launch environment. The experiment results in satellite level show that the vibration output in three directions changes smoothly and the imager orientation accuracy is 10.89urad (3σdocumentclass[12pt]{minimal}usepackage{amsmath}usepackage{wasysym}usepackage{amsfonts}usepackage{amssymb}usepackage{amsbsy}usepackage{mathrsfs}usepackage{upgreek}setlength{oddsidemargin}{-69pt}egin{document}$$3sigma$$end{document}) which is suitable for the requirement of the imager onboard the SDLT-1 satellite.ConclusionThe proposed method has been applied to the SDLT-1 satellite and the experiment results in component and satellite level show the feasibility of the method. Some satellite with rigorous micro-vibration requirement could employ the proposed method of this study.

RESEARCH ON THE RANDOM VIBRATION TEST OF THE SATELLITE

Control Strategy for Multi-Exciter Random Vibration Test

Study On Mtf Of Remote Sensing Imaging Under Arbitrary Known Vibration

Analysis of the Simulation Model Based on Remote Sensing Imaging under Vibration

Research Summary of the Multiparameter Combined Environmental Test of Spacecraft Component Reliability

Study and verification of micro-vibration test for a satellite

Optimization Design and Test of a Co-Support Structure of Borne Antenna and Flywheel of a Micro-Satellite

Equivalence analysis of acoustic excitation and random vibration exerted on spacecraft units

The Preliminary Research about Natural Frequency Decrease in Satellite Vibration Test when Excitation Level Increased

Model Updating for a Satellite Structure Based on Basic Excitation Test Data

Vibration Suppression of a Payload Bracket in a Satellite

Analysis of Parameter Sensitivity on Dynamics of Satellite Separation

Finite element model updating of damped structures using vibration test data under base excitation

A Simple Method for Identifying the Natural Frequency of a Micro Satellite with a Primary Structure Made of Aluminum Alloy

Thermal Vibration Analysis of the Antenna of Low Orbit Satellites of the Earth

Study on Micro-vibration Isolation System Design and Validation for the SDLT-1 Satellite of China

Satellite Vibration Environment Test:Acceleration Control and Over-test

Research of Vibration Characteristics of Periodic Truss Structures in Satellites

Design of Dynamic Parameter Testing System for Satellite Power

Research on Nonlinear Vibration Test and Parameter Identification of Aluminum Honeycomb Sandwich Plate in Satellite Structure

Characteristic Study of a Typical Satellite Solar Panel under Mechanical Vibrations