Abstract:The micro-electro-mechanical system (MEMS) resonator developed based on surface processing technology usually changes the section shape either due to excessive etching or insufficient etching. In this paper, a section parameter is proposed to describe the microbeam changes in the upper and lower sections. The effect of section change on the mechanical properties is studied analytically and verified through numerical and finite element solutions. A doubly-clamped microbeam-based resonator, which is actuated by an electrode on one side, is investigated. The higher-order model is derived without neglecting the effects of neutral plane stretching and electrostatic nonlinearity. Further, the Galerkin method and Newton⁻Cotes method are used to reduce the complexity and order of the derived model. First of all, the influence of microbeam shape and gap variation on the static pull-in are studied. Then, the dynamic analysis of the system is investigated. The method of multiple scales (MMS) is applied to determine the response of the system for small amplitude vibrations. The relationship between the microbeam shape and the frequency response is discussed. Results show that the change of section and gap distance can make the vibration soften, harden, and so on. Furthermore, when the amplitude of vibration is large, the frequency response softening effect is weakened by the MMS. If the nonlinearity shows hardening-type behavior at the beginning, with the increase of the amplitude, the frequency response will shift from hardening to softening behavior. The large amplitude in-well motions are studied to investigate the transitions between hardening and softening behaviors. Finally, the finite element analysis using COMSOL software (COMSOL Inc., Stockholm, Sweden) is carried out to verify the theoretical results, and the two results are very close to each other in the stable region.

System-level Modeling of Segmented Deformable Micromirror Using Multi-Port-element Network Method

Flexible Design Modeling Methodology for MEMS Based on Petri Net

Design Method of Non-standard Structure for MEMS Based on Multi-granularity Macro-modeling

Modeling and Simulation of Electrostatic Micropump Based on MEMS

Macromodeling Of The Electrostatically Actuated Rectangle Plate Based On Modal Projection

Macromodeling of the electrostatically actuated circular plate based on mode superposition method

Macro modeling method for electrostatic-drive silicon diaphragm

Research of an Adaptive Micro-Mirror Based on Micro-Opto-Electro-Mechanical- System

System-level modeling research of MEMS based on SABER platform

Machining and functional testing of adaptive micro-mirror array

Model of Electrostatic Actuated Deformable Mirror Using Strongly Coupled Electro-Mechanical Finite Element

Design and Simulation of a 19-Electrode MEMS Piezoelectric Thin-Film Micro-Deformable Mirror for Ophthalmology

Finite Difference Based Vibration Simulation Analysis of a Segmented Distributed Piezoelectric Structronic Plate System

Theoretical modeling and experimental investigation of in-phase resonant MEMS mirrors with cascaded structures

Modeling and Simulation of Two-Dimensional MOEMS Scanning Mirror

Analysis of Optical Diffraction Profiles Created by Phase-Modulating MEMS Micromirror Arrays

Response Analysis of a 2D MEMS Electromagnetically Driven Micro-Mirror

Static and Dynamic Mechanical Behaviors of Electrostatic MEMS Resonator with Surface Processing Error

Simulation, Optimization and Measurement of MEMS Torsion Micro Mirrors for Optical MEMS Application

Optical-Electromechanical Performance of Mems Tilting Micro-Mirrors for Aon Communication System

Design of an Electromagnetic Micro Mirror Driving System for LiDAR