Abstract:The pipe joints based on shape memory alloy (SMA) are widely used in various fields of fluid transport by virtue of their simple structure, easy assembly and high reliability. However, due to the complexity of the NiTiNb constitutive model, the plastic deformation and its effects have yet not been considered in the report of pipe joint connection system. In view of this background, this work constructs an SMA joint-steel pipe system (J-P system) and performs the finite element numerical simulation of the assembling process based on an SMA phenomenological constitutive model, where in the plastic-phase transformation coupling effect is considered. By altering the diameter expansion, wall thickness, service temperature and critical phase transformation, the change features of the von Mises stress, contact pressure and pull-out force of the J-P system are investigated. The results show that due to the coupling effect of phase transformation and plastic deformation, the evolution of Mises stress, equivalent transformation strain and equivalent plastic deformation in SMA joint show obvious regularity during assembly: in the loading stage, the phase transformation strain and plastic deformation increase with the increase of predeformation. At each subsequent loading step, the plastic strain remains unchanged. At the unloading stage, von Mises stress decreases and phase transformation strain remains unchanged. With temperature increase, the phase transformation strain decreases significantly and von Mises stress increases. At subsequent loading steps, von Mises stress and phase transformation strain remains unchanged. Within a certain size, the pull-out force decreases with the increase of diameter expansion; Among the 9 schemes with different wall thickness ratios, the pull-out force changes non-linearly with the wall thickness, and there is an optimal connection performance scheme. Within the range of room temperature (0 similar to 40 degrees C), the service temperature has little impact on the performance of the J-P system; With the increase of the critical phase transformation, the stress concentration layer within the SMA joint moves from the inside to the outside, and the pull-out force increases gradually within the range of the critical phase transformation from 0.07 to 0.14. The results also show that the stress concentration at the end of contact region can significantly increase the pull-out force of the J-P system.

Nonaxiality of Small-diameter Pipe Inner Surface Inspection Sensor

Non-Contact Inspection for Inner Surface of Small-Diameter Pipes Based on Laser-Psd

New Inner Surface Profile Sensor for Mini-Diameter Pipes

Noncontact Laser Inspection Based on a PSD for the Inner Surface of Minidiameter Pipes.

Photoelectric Detection and 3D Reconstruction System for the Inner Surface of Small-Diameter Pipes

3D Reconstruction of Small-diameter Pipes Inner Surface Based on Structural Light

Optical Inspection System For The Inner Surface Of A Pipe

In-Pipe Detection of Three-Dimensional Curving Mini-Pipe

Panoramic Optical Annular Staring Inspection System for Evaluating the Inner Surface of a Pipe

Local Geometric Measurement for 3-D Curved Micro-Pipe

Analysis and Experimental Study on the Measurement of Pipe Wall Thinning by Perturbation Method

Development of a Compliant Magnetic 3-D Tactile Sensor with AMR Elements.

A high-sensitivity rotatable 3D displacement sensor

Internal surface inspection method under linear structured light illumination based on dual non-coaxial optical paths

A Flexible Arrayed Eddy Current Sensor for Inspection of Hollow Axle Inner Surfaces

Magnetic Sensor Angle Adjustment to Improve Corrosion under Insulation Detection

A Highly Integrated Shape Memory Alloy Actuator with Precision Real-time Self-sensing Control

Development of Double-Insulated Ring Sensors for Hollow Pin Preload Measurement

Assembly Performance Simulation of NiTiNb Shape Memory Alloy Pipe Joint Considering Coupling Effect of Phase Transformation and Plastic Deformation

Liquid Metal Equipped Reed Stem for Angle Detection Sensor

Pipeline thickness measurement for in-line inspection using wholly stepped electromagnetic acoustic transducers