Abstract:A new dual-bandpass 180° hybrid coupler, based on four properly designed shorted-stub loaded stepped-impedance resonators, is proposed in this paper. In order to construct the collaboratively designed coupler/filter, the resonators are coupled magnetically and electrically with each other through three shorted stubs and an open coupled line, respectively. According to the approach of filter synthesis and the derived design equations, the characteristic admittances and electrical lengths of the resonators and coupling sections are determined to achieve the desired resonant frequencies, external Q factors, and internal coupling coefficients for dual passbands. A design procedure is provided. The design flexibilities for ratios of central frequencies and achievable bandwidths are explored. The component shows both filtering and power dividing functions within two specific passbands, whose good performances are demonstrated by the simulated and measured results. The two second-order passbands of a fabricated prototype are located at 2.42 and 5.84 GHz, with 4.6% and 5.2% bandwidths, respectively. The insertion losses are 1.0 and 1.4 dB over 3-dB power division. The isolations are better than 23.5 and 32.8 dB. In both the in-phase and out-of-phase responses, the in-band amplitude and phase imbalances are always within -1.6-0.6 dB and -6.5°-9.5°, respectively.

6B-2 Optimal Design of Quasi-Slanted SAW Transducer Employing Resonant SPUDT

Hybrid Non-Uniform- Q Lossy Filters with Substrate Integrated Waveguide and Microstrip Resonators

Substrate Integrated Waveguide Filter with Flat Passband Based on Complex Couplings

Collaborative Design of a New Dual-Bandpass 180 Hybrid Coupler

Novel Bandpass Filters by Using Cavity-Loaded Dielectric Resonators in A Substrate Integrated Waveguide

Design of a Miniaturized Dual-Band Double-Folded Substrate Integrated Waveguide Bandpass Filter with Controllable Bandwidths

Extended Doublet Bandpass Filters Implemented with Microstrip Resonator and Full-/Half-Mode Substrate Integrated Cavities

Bandpass Frequency Selective Surface with Two Sharp Sidebands Based on Shunted Quarter‐mode Substrate Integrated Waveguide Cavities

The SPUDT Technology for the Design and Fabrication of Filters and Switches in Communication System

Designed Structures of Interdigital Electrodes for Thin Film SAW Devices

Tilted IDT Designs for Spurious Modes Suppression in LiNbO3/SiO2/Si SAW Resonators

Tilted IDT Designs for Spurious Modes Suppression in LiNbO$_{\text{3}}$/SiO$_{\text{2}}$/Si SAW Resonators

Design of Miniaturized Narrow-Band POI-SAW Filter Using Mixed Ladder-DMS Topology

Compact Dual‐layer Substrate‐integrated Waveguide Bandpass Filters with Controllable Transmission Zeros

Analysis and Design of Single-Phase Unidirectional Transducers with High Directivity

Narrowband SIW-SSPP Hybrid Bandpass Filter With Compact Profile at Ka-Band

High-Selective Bandpass Filters Based on New Dual-Mode Rectangular Strip Patch Resonators

Near 6-Ghz Longitudinal Leaky SAW Filters with Spurious Mitigation on LiNbO3/SiO2/SiC Platform

Near 6-GHz Longitudinal Leaky SAW Filters with Spurious Mitigation on LiNbO<inf>3</inf>/SiO<inf>2</inf>/SiC Platform

A Novel Quasi-Elliptic HTS Filter with Group-Delay Equalization Using Compact Quasi-Lumped Element Resonators in VHF Band

Ultra-Compact Low-Pass Spoof Surface Plasmon Polariton Filter Based on Interdigital Structure