Abstract:Engine bearings on ships can experience rapid failure under extreme conditions, such as when seawater infiltrates the engine compartment due to collisions with reefs or missile attacks. To enhance the self-lubrication and wear resistance of these bearings, a composite coating consisting of ZrO 2 -PI/EP-PTFE has been designed. This coating was applied using liquid spraying technology onto the surfaces of A370 aluminum alloy, CuPb22Sn2.5 copper alloy, and 15# carbon steel. Three different coating thicknesses—20 μm, 30 μm, and 40 μm—were applied to each substrate. The tribological properties of these coatings on the three substrates were investigated under both dry sliding wear and seawater corrosion conditions. The results indicated that the tribological performance of the coatings is influenced by factors such as the coating hardness, frictional contacts, and the supporting effect of the substrate. The hardness and elastic modulus of the coatings decreased as the coating thickness increased. A thicker coating results in reduced support from the substrate. The adhesive wear of these coatings under dry sliding wear conditions on the different substrates is also presented. The coefficients of friction (CoFs) of these coatings increased with coating thickness on all three substrates. In contrast, the wear rates decreased as the coating thickness increased. The hardness of the coating was influenced by the support effect of the substrate. The primary factors governing the tribological performance of the coating under dry sliding conditions are the pinch action of the hard grinding ball against the soft coating on the hard substrate and the contact pressure. Abrasive wear, spalling wear, plough grooves, and spalling pits were observed under seawater corrosion conditions. These findings suggest that increased coating thickness is associated with lower coefficients of friction (CoFs) and wear rates. The main contributing factors are seawater corrosion and the scouring effect of high-frequency reciprocating friction.

Effect of Thickness and Hardness of Rubber Underlayer on Frictional Coefficient of Water-lubricated Integer Bearings

Experimental Study on Friction Characteristics and Water Film Stiffness of Water Lubricated Rubber Bearings

Two-way Thermal-Fluid-Solid Interaction Lubrication Characteristic Analysis of Water-lubricated Rubber Bearings

Tests for friction features of water-lubricated rubber bearings

Effect of Surface Topography and Structural Parameters on the Lubrication Performance of a Water-Lubricated Bearing: Theoretical and Experimental Study

Experimental study on seismic performance of laminated rubber bearings with friction slipping

A mixed-lubricated friction model of water lubricated bearing based on fractal theory

Tribological and Vibration Properties of Three Different Polymer Materials for Water-Lubricated Bearings

Experimental Study on Material Properties of Bearing Bush of Water Lubricated Bearing

The Influence of Scratches on the Tribological Performance of Friction Pairs Made of Different Materials under Water-Lubrication Conditions

Theoretical and experimental study on influences of surface texture on lubrication performance of a novel bearing

Magnetic-controlled friction behavior of a water-lubricated magnetorheological rubber bearing under boundary lubrication

The Effects of Mechanical Properties of Bearing Bush on Water Lubricated Plastic Bearing Lubricating Property

Theoretical and Experimental Research on the Friction Coefficient of Water Lubricated Bearing with Consideration of Wall Slip Effects

Investigations on Transitions of Lubrication States for Water Lubricated Bearing. Part I: Determination of Friction Coefficients and Film Thickness Ratios

Influence of Elastic Modulus of Bearing Materials on Mixed Elastohydrodynamic Lubrication Performance of Journal Bearings and Experimental Investigation

Synergistic Effect of Microconvex Texture and Particle Medium on the Tribological Property of the Rubber Sliding Interface

The investigation of support effect from hard substrate to soft coating of PI/EP-PTFE under different coating thicknesses and frictional contacts

Experimental Study on Friction Characteristics of Water-lubricated Composite-material Bearings

Combined Effect of Boundary Layer Formation and Surface Smoothing on Friction and Wear Rate of Lubricated Point Contacts During Normal Running-in Processes

Effects of Surface Texture on Turbulent Lubrication of Water-lubricated Journal Bearing