Abstract:Free-form surfaces have been widely used in complex optical devices to improve the functional performance of imaging and illumination quality and reduce sizes. Ultra-precision grinding is a kind of ultra-precision machining technology for fabricating free-form surfaces with high form accuracy and good surface finish. However, the complexity and variation of curvature of the free-form surface impose a lot of challenges to make the process more predictable. Tool path as a critical factor directly determines the form error and surface quality in ultra-precision grinding of free-form surfaces. In conventional tool path planning, the constant angle method is widely used in machining free-form surfaces, which resulted in non-uniform scallop-height and degraded surface quality of the machined surfaces. In this paper, a theoretical scallop-height model is developed to relate the residual height and diverse curvature radius. Hence, a novel tool-path generation method is developed to achieve uniform scallop-height in ultra-precision grinding of free-form surfaces. Moreover, the iterative closest-point matching method, which is a well-known algorithm to register two surfaces, is exploited to make the two surfaces match closely through rotation and translation. The deviation of corresponding points between the theoretical and the measured surfaces is determined. Hence, an optimized tool-path generator is developed that is experimentally verified through a series of grinding experiments conducted on annular sinusoidal surface and single sinusoidal surface, which allows the realization of the achievement of uniform scallop-height in ultra-precision grinding of free-form surfaces.

Algorithm generation of tool path for flycutter cutting of freeform optics surface

Non-redundant tool trajectory generation for surface finish machining based on geodesic curvature matching

A novel tool path generation algorithm for plane envelope grinding convex surface based on constant scallop height method

Numerical Control Tool-Path Generation for Subdivision Surface Using Toroidal Cutter on 5-Axis Machine Tool

Five-axis Tool Path Generation in CNC Machining of T-spline Surfaces

A generic uniform scallop tool path generation method for five-axis machining of freeform surface.

Mixed Tiny Path Smoothing Method Based on Sliding Convolution Windows for CNC Machining

The Cutter Envelope Surface Calculation of Multi-Axis NC Machining

Tool path generation for multi-axis freeform surface finishing with the LKH TSP solver

CNC Tool Path Generation for Freeform Surface Machining Based on Preferred Feed Direction Field

Research on Inverse Evaluation Mechanism in Toolpath Generation Based on Global Interpolation Simulation

Tool Path Generation for Multi-Degree-of-Freedom Fast Tool Servo Diamond Turning of Optical Freeform Surfaces

A feedback toolpath generation method for compound trimmed surface with machine’s dynamic characteristics confined

A Toolpath Planning Method for Optical Freeform Surface Ultra-Precision Turning Based on NURBS Surface Curvature

An accurate surface error optimization for five-axis machining of freeform surfaces

A new toolpath generation method with feed sensitive zones inspection based on inverse evaluation mechanism.

Spiral tool path optimization method for fast/slow tool servo-assisted diamond turning of freeform surfaces with highly form accuracy

Iso-Scallop Controlled Tool Path Generation for Free-Form Surfaces Based on Level Set Method

Optimization of Tool Path for Uniform Scallop-Height in Ultra-precision Grinding of Free-form Surfaces

Tool path generation and optimization for freeform surface diamond turning based on an independently controlled fast tool servo

Automatic Tool Path Generation of 2.5-Axis NC Rough Machining Based on Scattered Measured Data