Abstract:In freeform surface finishing, there are three major types of tool path topologies: the direction-parallel type, the contour-parallel type and the space-filling curve (SFC) type. The SFC topology is capable of covering the whole surface with only one path. In this paper, we present a new way of planning the SFC type tool path by formulating the planning task as a traveling salesman problem (TSP). The optimal path is generated in two steps. Firstly, a set of regular cutter contact (CC) points is generated on the input surface. A cutting simulation method is developed to evaluate the scallop error and determine the position of the next CC point in cross-feed direction. This method is free of local surface curvature assumptions and is therefore accurate for big cutters. Secondly, the obtained CC points are input into an efficient TSP solver LHK for the optimal CC point linking sequences. To stop the CC points from diagonal linking or penetrating linking, the Euclidean distance evaluation function for two CC points is redefined in LHK. The proposed tool path generation method is verified with several freeform surface examples; the results show that the method can automatically find the optimal feed direction and it can generate shorter tool path than the traditional SFC method. The feasibility of the proposed method is also verified by a cutting experiment. A new way of planning SFC type tool path is proposed.Cutting simulation method is proposed to evaluate the scallop error.Tool path planning task is formulated as a TSP and LKH is applied for solution.In LKH, the distance function is redefined to avoid incorrect linking problem.

Automatic Tool Path Generation of 2.5-Axis NC Rough Machining Based on Scattered Measured Data

Non-redundant tool trajectory generation for surface finish machining based on geodesic curvature matching

Numerical Control Tool-Path Generation for Subdivision Surface Using Toroidal Cutter on 5-Axis Machine Tool

Mixed Tiny Path Smoothing Method Based on Sliding Convolution Windows for CNC Machining

A novel tool path generation algorithm for plane envelope grinding convex surface based on constant scallop height method

A generic uniform scallop tool path generation method for five-axis machining of freeform surface.

A new toolpath generation method with feed sensitive zones inspection based on inverse evaluation mechanism.

The Cutter Envelope Surface Calculation of Multi-Axis NC Machining

The Tool Paths Generation Approach Based on Level-Set Methods in Die-Cavities NC Machining

A feedback toolpath generation method for compound trimmed surface with machine’s dynamic characteristics confined

Generating Efficient Toolpath by Cutter Posture Optimization in Five-Axis Machining Based on Inverse Feedback Mechanism

Exploratory Study of Spiral Nc Tool Path Generation on Triangular Mesh Based on Local Subdivision

Tool Path Planning Algorithm for Five-Axis NC Machining of Sculptured Surfaces

Five-axis Tool Path Generation in CNC Machining of T-spline Surfaces

Tool path generation for multi-axis freeform surface finishing with the LKH TSP solver

A Compound Feedrate Control Method For Multi-Axis Cnc Machining

A Method of Generating Spiral Tool Path for Direct Three-Axis Computer Numerical Control Machining of Measured Cloud of Point

Approximate tool posture collision-free area generation for five-axis CNC finishing process using admissible area interpolation

Approach optimizing tool paths arrangement based on genetic algorithm

Research on Inverse Evaluation Mechanism in Toolpath Generation Based on Global Interpolation Simulation

CNC Tool Path Generation for Freeform Surface Machining Based on Preferred Feed Direction Field