Abstract:Nano-aerosols are airborne aerosols in the range of 100 nm. They are present abundantly in both pollutants and viruses, both of which affect human health. Filtering these nano-aerosols leads to high-pressure drop in cabin filters due to their small sizes forming impermeable dust cake, and prior to cake formation the capture efficiency is rather poor with conventional microfiber filters. We have investigated a composite filter with a microfiber layer positioned immediately upstream of a nanofiber layer. Such composite filter provides high efficiency and low-pressure drop during all phases of filtration of nano-aerosols: initial depth filtration, transition, and final cake filtration. The behavior of the composite filter together with various filter benchmarks (single and composite filters of microfiber/nanofiber filters) has been investigated by monitoring the pressure drop, especially during cake filtration. Using the measurements together with Ergun/Kozeny-Carman equation and material balance we come up with a new method to determine the solid volume fraction and permeability of the cake. The grade efficiency for the most penetrating particle is also measured concurrently to define the incipient point to cake formation and provide material balance. Most importantly, for the first time we have confirmed that the cake ultimately forms on the composite filter is due to the cake that originates from the upstream microfiber layer and not from the downstream nanofiber layer. Therefore, the pressure drop for the composite filter can be sustained relatively low throughout the filtration. On the other hand, the aerosol capture efficiency stays very high from start-to-end of filtration, with high initial filtration efficiency courtesy of the nanofiber filter installed downstream of the composite filter. The price to pay is a slightly higher pressure drop for the composite filter in the clean unloaded state, but this is insignificant during aerosol loading as most pressure drop is attributed to that of the cake. For the first time we have introduced, also independently using Buckingham-Pi analysis, a brand new dimensionless parameter, Beta, which measures the equivalent “thickness” of additional cake deposition (in molten form) to the viscous flow resistance “path length” due to the additional cake deposit. A high-capacity filter aimed for heavy aerosol loading should have large Beta that results in low solidosity, high porosity, and high permeability for the cake. In our study, the microfiber-nanofiber composite filter has the highest Beta of nearly 4 and also highest efficiency. Despite high efficiency the single nanofiber filter has much lower Beta of 2, while the single microfiber filter has Beta of 3, yet much lower efficiency, especially at initial filtration. Using the microfiber-nanofiber composite filter design, we can “engineer the cake” deposited on the filter to be more permeable and with least flow resistance during aerosol loading to attain high Beta values. This is an innovative approach to increase the badly needed aerosol storage capacity with low pressure drop for the nanofiber filter while maintaining high efficiency throughout the aerosol loading for extended filtration applications. The highly permeable aerosol cake can also be cleaned by backpulsed-and-backblow readily for filter reuse.

Research note: Pressure drop and penetration for pre-charged and neutral particles on fibrous and membrane filters

Effect of filtration pressure on the particle penetration efficiency of fibrous filter media

Relationship Between Particle Charge and Electrostatic Enhancement of Filter Performance

Effect of electrostatic charge on aerosol filtration by nuclepore filters

Experimental and Numerical Investigation of Slip Effect on Nanofiber Filter Performance at Low Pressures

Enhancement of Filtration Efficiency by Electrical Charges on Nebulized Particles

The Effect of Electrostatic Forces on Filtration Efficiency of Granular Filters

The effects of particle charge on the performance of a filtering facepiece

Effect of the Electrostatics on the Fibrous Filter Filtrating Fly Ash

Filtration performance and loading capacity of nano-structured composite filter media for applications with high soot concentrations

Comprehensive evaluations of the bioaerosol filtration performance of high- and medium-efficiency filters under different influencing factors

Filtration performance of glass fibrous air filter media under sinusoidal flow condition

Research on the Advantages of Nanofibrous Air Filtration Membrane

Effects of surface morphology of electrospun polystyrene fiber on its air filtration performance

The Behavior of Phobic and Philip Oil Mist Filters Under High Pressure

Measurement of the Nanoparticles Distribution in Flat and Pleated Filters During Clogging

The pressure drop of fibrous surface filters for gas Filtration: Modeling and experimental studies

Microfiber-nanofiber composite filter for high-efficiency and low pressure drop under nano-aerosol loading

Experimental and CFD analysis of fluid flow through nanofiber filter media

Slip effect based bimodal nanofibrous membrane for high-efficiency and low-resistance air purification

Adhesion force analysis for prevention of particle resuspension in multiplexed inertial coalescence filters