Abstract:Drawing-tower fiber Bragg grating (FBG) array can be used in health monitoring of bridges, pipelines and some large-scale projects to realize temperature, stress and vibration quasi-distributed sensing. The grating array sensing system can detect the changes of the tested physical parameters by measuring the central wavelength of the grating. However, for the sensing system based on identical grating array consisting of uniform FBGs, it cannot measure accurately the shift of the reflective wavelength of a grating in the array due to the sidelobe superposition of the gratings. Compared with uniform Bragg grating, apodized FBG has smaller reflection peak sidelobes. It means that the reflection power of the apodized FBG can be concentrated to the central wavelength region, and the reflection peak signal will be not interfered with those of other gratings. In this paper, an apodized FBG array was in-line fabricated in a single mode fiber by on a drawing tower and used for dense quasi-distributed temperature sensing. The obtained apodized FBGs have a full width at half maximum (FWHM) of 0.09 nm and their sidelobes were decreased by -21.9 dB. A 1000-meter-long array consisting of 10000 apodized gratings was successfully fabricated and used for quasi-distributed temperature sensing. These gratings have good consistency, low transmission loss and good mechanical properties. Experimental results show that the array can accurately measure quasi-distributed temperature fields and the temperature sensitivity is 10.15 pm/degrees C. It is expected that the apodized grating array can find more applications in many fields.

Research on Temperature Compensation for Fiber Grating Array Sensors

Research On Measurement Of Fiber Bragg Grating Considering The Cross-Sensitivity Of Temperature And Strain

Influence of the apolipoprotein E epsilon4 allele on human embryonic development.

Temperature-compensating multiple fiber Bragg grating strain sensors with a metrological grating

Research on the Temperature Compensation of Optical Fiber Displacement Sensor Based on Multisensor Data Fusion.

Study on the Measurement System of Temperature-Compensated In-Fiber Bragg Gratings Strain Sensor

A Novel Fiberg Grating Sensing and Demodulating System with Temperature Compensation

Study of Fiber Grating Displacement Sensor

Passive Temperature-Compensating Technique for Microstructured Fiber Bragg Gratings

Fiber Bragg grating temperature sensor for marine application

Simultaneous displacement, temperature and strain sensing system based on fiber macro-bend loss and edge filter

Cantilever vibration sensor based on Fiber Bragg Grating temperature compensation

Intensity-Modulated Fiber Bragg Grating Sensor System Based on Radio-Frequency Signal Measurement

Quasi-Distributed Temperature Sensing Using Apodized Fiber Bragg Grating Array

Temperature insensitive fiber optical displacement sensors based on double fiber Bragg gratings

A Temperature Self-Adapting Fiber Bragg Grating Dynamic Sensor System

A Novel Fiber Bragg Grating Sensors Multiplexing Technique

Differential temperature compensation method for edge filtering strain sensors

The Improvement of Temperature Sensitivity by Eliminating the Thermal Stress at the Interface of Fiber Bragg Gratings

High-speed Fibre Bragg Grating Sensor Interrogation Using Dispersion-Compensation Fibre

On-line Writing of Fiber Bragg Grating Array on a Two-mode Optical Fiber for Sensing Applications