Abstract:Due to the extremely low Reynolds number, the mixing of substances in laminar flow within microfluidic channels primarily relies on slow intermolecular diffusion, whereas various rapid reaction and detection requirements in lab-on-a-chip applications often necessitate the efficient mixing of fluids within short distances. This paper presents a magnetic pillar-shaped particle fabrication device capable of producing particles with planar shapes, which are then utilized to achieve the rapid mixing of multiple fluids within microchannels. During the particle fabrication process, a degassed PDMS chip provides self-priming capabilities, drawing in a UV-curable adhesive-containing magnetic powder and distributing it into distinct microwell structures. Subsequently, an external magnetic field is applied, and the chip is exposed to UV light, enabling the mass production of particles with specific magnetic properties through photo-curing. Without the need for external pumping, this chip-based device can fabricate hundreds of magnetic particles in less than 10 min. In contrast to most particle fabrication methods, the degassed PDMS approach enables self-priming and precise dispensing, allowing for precise control over particle shape and size. The fabricated dual-layer magnetic particles, featuring fan-shaped blades and disk-like structures, are placed within micromixing channels. By manipulating the magnetic field, the particles are driven into motion, altering the flow patterns to achieve fluid mixing. Under conditions where the Reynolds number in the chip ranges from 0.1 to 0.9, the mixing index for substances in aqueous solutions exceeds 0.9. In addition, experimental analyses of mixing efficiency for fluids with different viscosities, including 25 wt% and 50 wt% glycerol, reveal mixing indices exceeding 0.85, demonstrating the broad applicability of micromixers based on the rapid rotation of magnetic particles.

Fabrication and Numerical Analysis of PDMS Micromixer on Microfluidic Chip

Fabrication of a Three-Layer PDMS Pneumatic Microfluidic Chip for Micro Liquid Sample Operation

Novel polydimethylsiloxane (PDMS) based microchannel fabrication method for lab-on-a-chip application

Fabrication of Fluidic Chips with 1-D Nanochannels on PMMA Substrates by Photoresist-Free UV-lithography and UV-assisted Low-Temperature Bonding

A simple method for fabricating multi-layer PDMS structures for 3D microfluidic chips

Fabrication of Patterned Magnetic Particles in Microchannels and Their Application in Micromixers

Novel Fabrication Technology Of Polydimethylsiloxane Microfluidic Chip

Fabrication of Microfluidic Systems in Poly(dimethylsiloxane)

Fabrication of PDMS Microfluidic Chip Used in Ultraviolet Integrated Biological Chip

An Effective Splitting-And-Recombination Micromixer With Self-Rotated Contact Surface For Wide Reynolds Number Range Applications

Fabrication of Microfluidic Chips Based on an EHD-Assisted Direct Printing Method

Direct Optical Micropatterning of Poly(dimethylsiloxane) for Microfluidic Devices

Fabrication of polydimethylsiloxane nanofluidic chips under AFM tip-based nanomilling process

PDMS Microchannel Fabrication Technique Based on Microwire-Molding

Facile Fabrication of a Rigid and Chemically Resistant Micromixer System from Photocurable Inorganic Polymer by Static Liquid Photolithography (SLP).

A Low-Cost Method of Fabricating Hybrid Micro-Nano Fluidic Chip by Double-Layer PDMS Mold and UV–thermal Nanoimprinting

Innovative 3D Microfluidic Tools for On-Chip Fluids and Particles Manipulation: From Design to Experimental Validation

Economical microfluidic processing technology based on PDMS

A compact and efficient three-dimensional microfluidic mixer

Design and development of an efficient fluid mixing for 3D printed lab-on-a-chip

Rapid method for design and fabrication of passive micromixers in microfluidic devices using a direct-printing process.