Abstract:Abstract In this paper, we propose a thermal wind speed sensor Verilog-A model with thermal-fluid-electric hybrid characteristics. Because the structure of the thermal wind sensor and the interface circuit chip are designed separately, which cannot effectively carry out MEMS-IC (integrated circuit) co-simulation, the overall performance of the sensor and interface circuit chip is prone to large deviation. At the same time, the separation of MEMS structure and IC design process leads to long product development cycle and high cost. This paper proposes an improved simulation model by analyzing the behavior characteristics of the thermal wind speed sensor. The simulation model consists of 11 thermistors, 3 capacitors, a voltage-controlled voltage source, and a voltage-controlled current source. The Taylor series expansion of the differential equation of heat conduction is carried out, and then the thermistor and capacitor networks are established according to the corresponding relationship between the thermal parameters and the electrical parameters, including the thermal conduction unit, the convection unit and the heat capacity in the chip. The model fully considers the effects of various physical effects and parasitic effects, and is implemented using the hardware description language Verilog-A. The sensor and interface circuit can be simulated simultaneously to optimize the circuit design. It is beneficial to the integration of sensors and interface circuit, reducing the number of tape-outs, increasing the success rate, and reducing costs. The consistency between the simulation results and the experimental curves verified the correctness of the macro model. The behavior characteristics of constant power (CP) and constant temperature heating were described. In CP mode, the output voltage error is less than ± 6.5%, the chip temperature error is less than 4.0%. The presented modeling approach can be the basis for the development of complete MEMS-IC design technology library of thermal wind speed sensor, aiming at optimum designs of integrated thermal wind speed sensor.

SPICE Model with Lumped Circuits for A Thermal Flow Sensor

A System-Level Model for a Silicon Thermal Flow Sensor

Research on Constant Temperature Difference (CTD) Model Control Circuit of Thermal Flow Sensor

Device modeling of superconductor transition edge sensors based on the two-fluid theory

An efficient macro model for CMOS-MEMS thermal wind speed sensor

A numerical investigation of conjugate forced heat transfer for a micro thermal flow sensor

Lumped 3-D Equivalent Thermal Circuit Model for Transient Thermal Analysis of TSV Array

A Cross-Type Thermal Wind Sensor With Self-Testing Function

Efficient system-level simulations of thermal wind sensors considering environmental factors

A Self-Packaged Thermal Flow Sensor by CMOS MEMS Technology

Thermal-aware electrical analysis of high-speed interconnect

Modeling and Design of a New Type Air Mass Flow Sensor

A Physics-based Thermal Model of Nanosheet MOSFETs for Device-Circuit Co-design

Flip-Chip Packaging for a Two-Dimensional Thermal Flow Sensor Using a Copper Pillar Bump Technology

Analytical and Electrical Modeling of a MEMS Thermoelectric Microwave Power Sensor

Thermal simulation analysis of gas flow sensor based on thin-film thermopiles

Fluid-Solid Coupling Simulation of MEMS Thermal Wind Sensor

A Flip-Chip Packaged CMOS Thermal Flow Sensor

An Efficient Macromodel Extraction Strategy for Packaged MEMS Thermal Wind Sensor Considering Multiphysics

Modeling and Simulation of a Novel Capacitive Temperature Sensor

Design and Optimization of Interface Circuits of MEMS Thermal Wind Speed Sensor Based on a Macro Model