Abstract:To bring the potential power of the capacitively coupled contactless conductivity detection ((CD)-D-4) technique to full play and extend the application fields of (CD)-D-4, our previous work has developed a (CD)-D-4 sensor which is suitable for conductivity detection of electrolyte solution in industrial fields (Sensors and Actuators A 213 (2014) 1-8). With the introduction of series resonance principle, the (CD)-D-4 sensor can overcome the influence of coupling capacitances on conductivity measurement. By a specific design of shield configuration, the (CD)-D-4 sensor can overcome the influence of stray capacitances and the environment interference in industrial fields. Although the measurement performance of the (CD)-D-4 sensor is satisfactory and it is suitable for the conductivity detection in industrial fields, the input-output characteristic of the (CD)-D-4 sensor is non-monotonic, which may limit the practical applications of the (CD)-D-4 sensor. To overcome this drawback, an improved (CD)-D-4 sensor for conductivity detection in industrial fields has been developed. The basic conductivity measurement method (the series resonance principle) and the shield configuration of the improved (CD)-D-4 sensor are the same as those of the (CD)-D-4 sensor in our previous work. However, the measurement circuit of the detection path of the improved (CD)-D-4 sensor has been optimized. The one-inductor design has been replaced by a two-inductor design. With this optimization, the input-output characteristic of the improved (CD)-D-4 sensor is theoretically monotonic. Conductivity measurement experiments were carried out on four pipes with inner diameters of 1.8 mm, 3.3 mm, 5.0 mm and 7.6 mm, respectively. The experimental results indicate that the development of the improved (CD)-D-4 sensor is successful. In comparison with the previous (CD)-D-4 sensor, the measurement accuracy of the improved (CD)-D-4 sensor is comparable. But, the improved (CD)-D-4 sensor has the advantages of the monotonic input-output characteristic and the convenience for practical conductivity detection in industrial fields. Meanwhile, it is found that the input-output characteristic of the improved (CD)-D-4 sensor is nonlinear and the sensitivity of the improved (CD)-D-4 sensor decreases with the increase of conductivity. (C) 2015 Elsevier B.V. All rights reserved.

Noise reduction method for the multi-sensor system measuring DC current

Contactless Current Measurement for Enclosed Multiconductor Systems Based on Sensor Array.

An Improved Capacitively Coupled Contactless Conductivity Detection Sensor for Industrial Applications

Study of Current Measurement Method Based on Circular Magnetic Field Sensing Array

Optimal Design of Differential Sensor Array for Interference Elimination of Noninvasive Multicore Cable Current Measurement

Magnetic Interference Suppression of Tunnel Magnetoresistance Current Sensor in Power Converters

The Application of Non-Invasive Sensor in Unbalanced Three-Phase Current Detecting

An Improved Impedance Measurement Method Based on Multi-Sine Signal Considering the Suppression of Noise Interference

A Modulation Method for Tunnel Magnetoresistance Current Sensors Noise Suppression

Noninvasive Current Sensor for Multicore Cables

Event-Driven Non-Invasive Multi-Core Cable Current Monitoring Based on Sensor Array

Event-Based Non-Intrusive Home Current Measurement Using Sensor Array.

Non-Invasive Integrated Device for Multi-Core Cable Current Measurement Based on TMR Sensor Array

A Non-Contact Micro-Ampere DC Current Digital Sensor Based on the Open-Loop Structure

Anti-Interference Current Sensing With Enhanced Sensitivity Based on Magnetoresistive Sensors

Research on a Noise Reduction Method Based on Multi-Resolution Singular Value Decomposition

A New Current Measurement Method Based on Circular Tunneling Magnetoresistive Sensor Array

A NEW METHOD FOR REAL-TIME DETECTING HARMONICS AND REACTIVE CURRENTS IN SINGLE-PHASE CIRCUIT

A Large Current Detection System Based on Dual Wheatstone Bridge Magnetoresistive Sensor

New Method for Suppressing Noise Based on Different Gain Amplifier Signal Fusion

Parametric Reconstruction of Multiple Line Currents Based on Magnetic Sensor Array