Abstract:Thrust performance of Liquid-propellant laser propulsion (LLP) is seriously influenced by factors like laser parameters, choice of propellants and ablation materials. For the purpose of studying these influences, series of impulse measuring experiments for various propellants and ablation materials were conducted. The key device is a Horizontal Momentum Measuring Lever, which covers a C, measuring range from 10(3) Ns/MJ to about 1.6 x 10(4) Ns/MJ. A Nd:YAG laser was used as the laser source. From the result, it is found that laser energy density plays an important role on LLP efficiency, higher energy density leads to higher C-m and I-sp. Highest C-m of about 10(4) Ns/MJ with the I-sp of 3.57s was achieved by focusing the laser to the average energy density of 8.83 X 10(8)W/cm(2). Besides of that, it is also found that when the energy density is certainly high, C-m of LLP increases stably with the increase of the propellant thickness, which gives a potential way to further improve the thrust performance in LLP.

Primary Experimental Study on Liquid Ablatant for Laser Propulsion

Performance Measurements of Laser Propulsion with Water Spray Droplets

Influencing Factors on Propulsive Performances of Water Droplets for Laser Propulsion

Measurements of Impulse Coupling Coefficient for Laser Propulsion with Liquid Propellants

Experimental Investigation on Ablation Mode of Laser Propulsion

Propulsive Characteristics of Water Droplets for Multi-Pulse Laser Propulsion

Effects of nozzle configuration and laser focusing site on propulsive performances of atomized water droplets

Experimental Study of "ablation Mode" Laser Propulsion

Time-Resolved Force and Schlieren Visualization Study of TEA CO[sub 2] Laser Ablation of Water Droplets

Experimental Study on Coupling Coefficients for TEA CO2 Laser Propulsion

Transmitted laser propulsion in confined geometry using liquid propellant

The Experimental Investigation of Laser-driven Water Vehicle

Experimental Study on Laser Ablating Different Materials in Atmosphere

The Characteristics of Confined Ablation in Laser Propulsion

APPLICATION OF ENERGETIC MATERIALS IN LASER ABLATIVE MICROPROPULSION

A Low Diffraction Laser Beam As Applied to Polymer Ablation

Experimental Investigation of Liquid-Propellant Laser Propulsion with A Horizontal Momentum Measuring Lever

High Coupling Coefficient Laser Propulsion Mode

Numerical Simulation and Experiments on the Behavior and Mechanism of Laser-Assisted Droplet Transfer

Experimental Study on Laser Propulsion with Metal-Doped PVC Targets under Irradiation of Two Different Lasers

Experimental Investigation of Glass-Layer Confined Ablation in Laser Plasma Propulsion