The Study Status of Ablative Laser Propulsion

LI Chong,DOU Zhi-guo,LI Xiu-qian

DOI: https://doi.org/10.3969/j.issn.0253-2743.2007.04.003

2007-01-01

Abstract:Based on the comprehensive investigation into the worldwide literatures,the study status of ablative laser propulsion is summarized.Some valuable information is provided for relative researchers.

What problem does this paper attempt to address?

Advances in Study on Laser Propulsion

Hong Yanji,Li Xiuqian,Dou Zhiguo

DOI: https://doi.org/10.3321/j.issn:1000-6893.2009.11.001

2009-01-01

Abstract:More and more researchers have been showing great interest in laser propulsion for its outstanding merits,such as high specific impulse,low cost,etc. Laser propulsion research programs and their development history abroad have been introduced briefly. The latest progress of laser propulsion researches is summarized. Degree of maturation of related technologies is analyzed,such as laser,transmission control system,thermodynamic protection of nozzle,etc. The development trend of laser propulsion is discussed. The application prospect of laser propulsion is presented. The key problems that should be urgently sloved are pointed out such as the indepth study on operation mechanism of laser propulsion.
Status and development trend of concept studies on laser propulsion thruster

Xiu-qian LI,Yan-ji HONG,Guo-qiang HE,Hong-lin YAO

2005-01-01

High Power Laser and Particle Beams

Abstract:Laser propulsion technology is one of the advanced propulsion technologies that has been paid a great deal of attention to. Of all the laser propulsion technologies, laser thruster technology is an important technology, and it is also a vital one. Based on a thoroughly research on the home and foreign literatures, the status and development trend of concept studies on laser propulsion thrusters is summarized. The advantages and disadvantages of the thrusters are pointed out.
Laser Propulsion in Development

Yan-ji HONG,Xiu-qian LI,Zhi-guo DOU

DOI: https://doi.org/10.3321/j.issn:1001-4055.2009.04.020

2009-01-01

Abstract:Laser propulsion(LP) is perhaps one of the most realistic advanced propulsion concepts and an effective alternative to conventional rocket launching techniques.A laser is used in laser propulsion as a remote energy source for propulsion.The thrust is produced by high energy exhaust stream caused by laser-induced vaporization of material.More and more scholars have been showing a great interest in laser propulsion for its high specific impulse,low cost,high reliability,etc.The studies on laser propulsion have been carried out in USA,Japan,Germany,Russia,etc.Laser propulsion has a wide application in the field of micro-satellite launch into LEO,attitude and orbit control,and etc.The study programs of laser propulsion in recent years have been summarized with the discussions of its future development trend.This review may provide a guide for further study of laser propulsion.
Exploration of Mechanism and Applications for Ablation Laser Propulsion

TANG Zhi-ping

DOI: https://doi.org/10.3969/j.issn.0253-2778.2007.10.024

2007-01-01

JUSTC

Abstract:Laser propulsion is a new driving concept and will have important applications in space aviation.Our new research advances in ablation laser propulsion with condensed propellants were reviewed,including the mechanism,laser driving by water,laser micro-thruster model and the conceptual design of Omni-directional receiving laser engine.The motivation of this work is to explore the mechanism,regularity and possible applications of laser propulsion.
Laser Propulsion Principle and Development

王骐,李琦,尚铁梁

DOI: https://doi.org/10.3969/j.issn.1001-5078.2003.01.001

2003-01-01

Abstract:In this paper laser propulsion principle,test exp eriment design and development are introduced in brief.Investigation content in future is given.
Reviews of the Propulsive Characteristics Study on Liquid Propellants for Laser Propulsion

Xiu-qian LI,Yan-ji HONG,Guo-qiang HE

DOI: https://doi.org/10.13675/j.cnki.tjjs.2010.01.023

2010-01-01

Abstract:For future laser propulsion missions in space, the choice of propellant will be critical for designing appropriate mission parameters. Recent research on liquid propellants for laser propulsion has been intensive and international in scope. The achievements in the study on the propulsive characteristics of liquid propellants were commented. The outstanding un-solved problems were pointed out with the suggestion of using minor sized water droplets as propellants. Study results indicate that atomized water droplets and liquid films have good propulsive characteristics.
Experimental Study of "ablation Mode" Laser Propulsion

童慧峰,唐志平,胡晓军,龚平,李静,蔡建,王声波,林丽耘

2004-01-01

High Power Laser and Particle Beams

Abstract:Experiments that use single-pulse laser to ablate small steel ball in atmosphere were conducted. In these experiments, the propulsion efficiency parameters were obtained and different phenomena for the steel ball in front and back of the focus were analyzed in detail. To get a series of experiment data, experiments for different ambient conditions and different target materials were conducted and the propulsion parameters were obtained, and the experiment data were compared with those of overseas and numerical results.Experimental results showed that the material of target and the laser intensity were the main factors influenced the mechanical coupling coefficient(c_m), and the c_m value increased a few with the decreased of ambient pressure.
Experimental Investigation on Ablation Mode of Laser Propulsion

Jian CAI,Xiao-jun HU,Zhi-ping TANG

DOI: https://doi.org/10.3321/j.issn:1001-4055.2008.03.023

2008-01-01

Abstract:With a high power TEA-CO2 pulsed laser(20 J/pulse,66~150 Hz),both single-and multi-pulse propulsion experiments are conducted for three kinds of parabolic thrusters with 3 solid propellants POM,PMMA and PVC,respectively.The single pulse experiments give the maximum momentum coupling coefficient Cm 2.7×10-4 N/W(thruster A with POM).The Cm for multi pulse experiments is much lower than the single pulse case.The PVDF stress gauges and infrared camera are used to measure the pressure and temperature distribution and evolution on the wall of the thrusters.The maximum temperature increase for 49 pulses and peak pressure measured are 110 ℃ and 2.3 MPa,respectively.It suggests the thermo-mechanical impact effect should be taken into account in the laser thruster study.
Brief Review on Pulse Laser Propulsion

Haichao Yu,Hanyang Li,Yan Wang,Lugui Cui,Shuangqiang Liu,Jun Yang

DOI: https://doi.org/10.1016/j.optlastec.2017.09.052

2018-01-01

Abstract:Pulse laser propulsion (PLP) is an advanced propulsion concept can be used across a variety of fields with a wide range of applications. PLP reflects superior payload as well as decreased launch costs in comparison with other conventional methods of producing thrust, such as chemical propulsion or electric propulsion. Numerous researchers have attempted to exploit the potential applications of PLP. This paper first reviews concepts relevant to PLP, including the propulsion modes, breakdown regimes, and propulsion efficiency; the propulsion targets for different materials with the pulse laser are then discussed in detail, including the propulsion of solid and liquid microspheres. PLP applications such as the driven microsatellite, target surface particle removal, and orbital debris removal are also discussed. Although the PLP has been applied to a variety of fields, further research is yet warranted to establish its application in the aerospace field. (C) 2017 Elsevier Ltd. All rights reserved.
Status of Study on the Effect of Laser Radiation to Water Droplet

LI Xiu-qian,HONG Yan-ji,HE Guo-qiang,CUI Cun-yan

DOI: https://doi.org/10.3969/j.issn.0253-2743.2007.04.034

2007-01-01

Abstract:Initiated by the paper"pefformance measurements of laser propulsion with liquid water spray droplets"(High Power Lasers and Particle Beams, 2006,Vol.18,No.3),based on its application in laser propulsion,the experimental and theoretical studies on the interaction of laser and water droplet were reported.Some unresolved problems have been pointed ont.Many valuable first hand information was provided for the readers of relative research field.The attrac- tive near-future applications of water droplets ablation laser propulsion in aerospace field were discussed.
Characteristic investigation of ablative laser propulsion driven by nanosecond laser pulses

Z.Y. Zheng,J. Zhang,X. Lu,Z.Q. Hao,X.H. Yuan,Z.H. Wang,Z.Y. Wei

DOI: https://doi.org/10.1007/s00339-006-3498-z

2006-01-01

Applied Physics A

Abstract:The momentum transfer and the specific impulse of the ablative laser propulsion of nanosecond laser irradiation on copper, lead, aluminum and graphite targets are investigated. The effects of the ambient pressure and laser focal spot sizes on the target momentum are measured. The results show that the target momentum strongly relates to the ambient pressure and target property. The highest target momentum about 2.28 g·cm/s is obtained on lead targets under 1 atmospheric pressure. With the increase of the focal spot sizes, the specific impulse decreases. The highest specific impulse in vacuum is about 950 s on copper targets.
Research Progress of Laser Propulsion with Liquid Propellants

Sheng Deren,Shi Xiangkun,Chen Jianhong,Yao Hua,Li Wei

DOI: https://doi.org/10.3788/lop51.050002

2014-01-01

Laser & Optoelectronics Progress

Abstract:The main research results in recent ten years of laser propulsion with liquid propellants are summarized internally and internationally. The general mechanism of laser propulsion with liquid propellants is analyzed. And the splashing is concluded as the most important constraint of the performance of liquid propellants. Changing the geometries of propellants and increasing the viscosity of liquid are presented as two effective ways to improve propulsive performance. And the performance characteristics of liquid volume, thin film, droplet and highly viscous propellants are commented successively based on the different ways. The hexane film, water droplet and highly viscous solutions are concluded as three kinds of liquid propellants with better integrated propulsive performance. Finally the compound propellant is pointed out to be one of the most important future directions of laser propulsion with liquid propellants.
Primary Experimental Study on Liquid Ablatant for Laser Propulsion

Xiu-Qian Li,Yan-Ji Hong,Jun Wang,Jing-Peng Chen,Guo-Qiang He

DOI: https://doi.org/10.1063/1.2203274

2006-01-01

AIP Conference Proceedings

Abstract:A TEA CO2 laser was employed to ablate spray droplets for laser propulsion.. Impulse coupling coefficient was derived from the force sensor data. Experimental results indicate that coupling coefficient C. was largely dependent on droplet Sauter mean diameter (SMD), velocity and their joint distribution.
Interaction between Laser and Liquid Material & Its application in Laser Propulsion

Li Xiuqian,Hong Yanji,Cui Cunyan,Wen Ming,He Guoqiang

DOI: https://doi.org/10.3969/j.issn.1000-372X.2006.02.010

2006-01-01

Applied laser

Abstract:The study on laser-liquid interaction progress was summarized,with attention to its application in laser propulsion.The desiderating unsolved problems and the exigent demands of further research were pointed out.
PROSPECTIVE APPLICATION OF LASER PLASMA PROPULSION IN ROCKET TECHNOLOGY

鲁欣,张杰,李英骏

DOI: https://doi.org/10.3321/j.issn:0379-4148.2002.12.008

2002-01-01

Physics

Abstract:Interest in laser plasma propulsion is growing intensively. The interaction of high intensity short laser pulses with materials can produce plasma expansion with a velocity of hundreds of km/s. The specific impulse of ablative laser porpulsion can be many tens of times greater than that of chemical rockets. The development and potential application of laser plasma propuslsion are discussed.
The Study Status of New Lasers and Its Applications

LI Xiuqian,DOU Zhiguo,LI Qian,WEN Ming,CUI Cunyan

2008-01-01

Abstract:Laser technology is playing a very important role in military and civil fields.Based on a thoroughly research on the home and foreign literatures of laser technology,the research status of new lasers,including solid state heat capacity laser,ceramic laser,random laser,etc,is summarized.Comparing the advantages of new lasers to that of classical lasers,a discussion on the wide application future of new lasers is given.
APPLICATION OF ENERGETIC MATERIALS IN LASER ABLATIVE MICROPROPULSION

Long Jiao,Jian Cai,Honghao Ma,Zhaowu Shen,Long Li,Zhiping Tang

DOI: https://doi.org/10.1615/intjenergeticmaterialschemprop.2015011939

2015-01-01

International Journal of Energetic Materials and Chemical Propulsion

Abstract:In order to find important factors which could affect laser ablative micropropulsion, three laser beams and two energetic materials were used to study the interaction relationships. For all the beams, with the increase of laser duration, the impulse increased but C-m, I-sp, and eta decreased. The round beam has a higher I-sp and eta under the same pulse duration due to the highest power intensity. Rectangular beam just has the highest impulse under the same laser energy density. Under a rectangular beam of 400 mu m x 10 mu m, GAP showed a better propulsion performance than DBP. GAP with a thickness of 50 mu m exhibited a better performance than the GAP with a thickness of 30 mu m. If a higher power density from a laser with a rectangular beam can be available by compressing the beam further or by improving the laser power, even higher propulsion performance can be expected.
Some Thoughts on Condensed Propellants for Laser Propulsion

Yan-ji HONG,Xiu-qian LI,Dian-kai WANG,Zhi-guo DOU

DOI: https://doi.org/10.3321/j.issn:1001-4055.2009.05.020

2009-01-01

Abstract:More and more scholars have shown great interests in liquid and solid propellants.The current research results show the high momentum coupling coefficient of liquids and the high specific impulse of solids.However,the internal efficiency of condensed propellants was relatively low.The ideal thermodynamic cycle of laser propulsion process was given as a comparison to chemistry rocket.There were no advantages in the field of internal efficiency of laser propulsion compared to chemistry rocket.The effects of dopants,energetic materials,liquid films on the ideal thermodynamic cycle of laser propulsion were analyzed.It is suggested to choose the liquid film,energetic materials and doped matters as propellants for laser propulsion so as to increase the specific impulse and coupling coefficient synchronously.This work may be helpful in the choice of condensed propellants for the future tasks of laser propulsion.
Effect of Nozzle Geometry on the Performance of Laser Ablative Propulsion Thruster

Long Li,Long Jiao,Zhiping Tang,Xiaojun Hu,Jie Peng

DOI: https://doi.org/10.1007/s00339-016-0040-9

2016-01-01

Applied Physics A

Abstract:The performance of “ablation mode” laser propulsion thrusters can be improved obviously by nozzle constraint. The nozzle geometry of “ablation mode” laser propulsion thrusters has been studied experimentally with CO 2 lasers. Experimental results indicate that the propulsion performance of cylindrical nozzle thrusters is better than expansionary nozzle thrusters at the same lengths. The cylindrical nozzle thrusters were optimized by different laser energies. The results show that two important factors, the length-to-diameter ratio α and the thruster diameter to laser-spot diameter ratio β , affect the propulsion performance of the thruster obviously. The momentum coupling coefficient C m increases with the increase of α , while C m increases at first and then decreases with the increase of β .
Simulation of Ablation Mode Laser Propulsion Efficiency of Confined Target Geometry

Tong Hui,Cas Key

2011-01-01

Abstract:Under the irradiation of high power laser, the surface matter of solid target can be vaporized and ionized instantly. The ejected high temperature and high pressure plume generates propulsion force, this is the fundamental of ablated laser propulsion. A general Godunov finite difference WENO （Weighted Essentially Non-Oscillatory） schemes which have fifth-order accuracy is used to conduct a numerical calculation for laser ablated solid target and its ablated propulsion efficiency. Simulation results show that the propulsion efficiency is dependent to varied degrees on the coupling of target cross direction radius with the laser spot size; the confined geometry of the target surface strengthens the propulsion efficiency dramatically.

The Study Status of Ablative Laser Propulsion

Advances in Study on Laser Propulsion

Status and development trend of concept studies on laser propulsion thruster

Laser Propulsion in Development

Exploration of Mechanism and Applications for Ablation Laser Propulsion

Laser Propulsion Principle and Development

Reviews of the Propulsive Characteristics Study on Liquid Propellants for Laser Propulsion

Experimental Study of "ablation Mode" Laser Propulsion

Experimental Investigation on Ablation Mode of Laser Propulsion

Brief Review on Pulse Laser Propulsion

Status of Study on the Effect of Laser Radiation to Water Droplet

Characteristic investigation of ablative laser propulsion driven by nanosecond laser pulses

Research Progress of Laser Propulsion with Liquid Propellants

Primary Experimental Study on Liquid Ablatant for Laser Propulsion

Interaction between Laser and Liquid Material & Its application in Laser Propulsion

PROSPECTIVE APPLICATION OF LASER PLASMA PROPULSION IN ROCKET TECHNOLOGY

The Study Status of New Lasers and Its Applications

APPLICATION OF ENERGETIC MATERIALS IN LASER ABLATIVE MICROPROPULSION

Some Thoughts on Condensed Propellants for Laser Propulsion

Effect of Nozzle Geometry on the Performance of Laser Ablative Propulsion Thruster

Simulation of Ablation Mode Laser Propulsion Efficiency of Confined Target Geometry