Abstract:A novel demodulation scheme with Sage-Husa adaptive Kalman filtering algorithm is presented for the digital readout system of a micro-machined gyroscope. Based on the analysis of the detection signal from gyroscope, a mathematical model of the detection signal is established in the condition of the additive white Gaussian noise, and the state and observation model for the demodulation scheme are also given. Moreover, the simulation system is built by the Matlab/Simulink. Assuming the input signal of angular velocity is the step or sine function, and the statistical characteristics of the noise in the detection signal are unknown, simulations are given to demodulate the detection signal with different SNRs (signal-to-noise ratio). In addition, the phase sensitive demodulation scheme in the analog readout system is simulated for comparison. Results show that, the demodulation gains reach +24.23dB (input SNR is above -12.04dB) and +23.92dB (input SNR is above -16.99dB) respectively when the angular velocity input is Ω = 0.005[deg/s] for the step function, while Ω = 0.005 sin(2π × 50t)[deg/ s] for the sine function. Meanwhile, the demodulation gain increases along with the decreasing SNR of the detection signal. Compared with the analog phase sensitive demodulation scheme, the demodulation output with Sage-Husa adaptive Kalman algorithm has the shorter convergence time, but about 5dB higher of MSE (mean square error). In conclusion, the novel demodulation scheme with Sage-Husa adaptive Kalman filtering algorithm can real-timely and precisely estimate the covariance of dynamic noise in the detection signal from gyroscope, and increase the SNR of the demodulation signals dramatically. It can demodulate the angular velocity accurately and quickly, and shows a good practicability. Copyright © 2007 by ASME.

Research on application and simulation of Sage-Husa adaptive Kalman filtering algorithm in digital readout system for a micro-machined gyroscope

A novel demodulation scheme in the digital readout system for a micro-machined gyroscope

Design and Test of MEMS Gyroscope Control System Based on LMSD

Advancements in Buoy Wave Data Processing through the Application of the Sage-Husa Adaptive Kalman Filtering Algorithm

Digital Readout System for Micromachined Gyroscope and Analysis for Its Demodulation Algorithm

Digital Readout System for a Micro-Machined Gyroscope and Its Demodulation Algorithm

Design of adaptive strong tracking and robust Kalman filter

A Strong Tracking and Robust Kalman Filter

Research of On-Line Modeling and Real-Time Filtering for MEMS Gyroscope Random Noise

AN ESTIMATION OF THE MEMS GYROSCOPE ERROR BASED ON THE KALMAN FILTER ALGORITHM

An Adaptive Kalman Filtering Algorithm for Autonomous Orbit Determination Based-on BP Neural Network

Digital Detection and Optimization Design for Resonant Fiber Optic Gyroscope

An Adaptive Robust Cubature Kalman Filter Based on Sage-Husa Estimator for Improving Ship Heave Measurement Accuracy

Frequency-scanning Interferometry for Dynamic Measurement Using Adaptive Sage-Husa Kalman Filter

Simple Adaptive Filtering Scheme to Improve Measurement Accuracy of Gyroscope on Angular Motion Base

An Adaptive Filtering Approach Based on the Dynamic Variance Model for Reducing MEMS Gyroscope Random Error

Research of Phase-Sensitive-Detection Algorithm Based on Adaptive Filtering

Adaptive Kalman Filter Enhanced With Spectrum Analysis for Wide-Bandwidth Angular Velocity Estimation Fusion

Dynamic Performance Comparison of Two Kalman Filters for Rate Signal Direct Modeling and Differencing Modeling for Combining a MEMS Gyroscope Array to Improve Accuracy

Digital Signal Processing For A Micromachined Vibratory Gyroscope Based On A Three Dimensional Adaptive Filter Demodulator

An improved Sage Husa adaptive robust Kalman Filter for de-noising the MEMS IMU drift signal