Abstract:This article proposes a digital control structure for a doubly decoupled gyroscope working in the Lissajous frequency-modulated (LFM) mode based on digital phase-locked loops (PLLs), which demodulates the angular rate signal directly from the readable digital gyroscope resonance frequency, eliminating the need for specific frequency readout circuits. The resonance frequencies of the LFM gyroscope working modes contain a mode mismatch frequency modulated by input angular rate, respectively, which are tracked by two digital PLLs followed by subsequent digital demodulation and filtering. A linearized model of the digital PLL is built to analyze noise and control characteristics for different PI parameters. The impact of different amplitude–phase extraction architectures on the extracted phase signal is also addressed in this article. Contrast experiments are carried out using the same gyroscope with large internal thermal stress due to the silicon-glass bonding process and no stress relief structure around the sensing element, working in the traditional amplitude-modulated (AM) mode and the LFM mode. Overall, the LFM working mode maintains its low-temperature sensitivity and high stability in spite of the large internal thermal stress in the gyroscope compared to AM working modes. The maximum scale factor variation over the temperature range from 10 °C to 50 °C is 1000 ppm for the LFM mode compared to 51 900 ppm for the AM closed mode. The maximum zero rate output drift over the same temperature range is 0.1248 °/s for the LFM mode and 10.7139 °/s for the AM closed mode. The scale factor nonlinearity is 329 ppm with an angular rate input range of ±50 °/s for the LFM mode compared to 1902 ppm for the AM closed mode. The LFM mode zero-bias fluctuation for ten days is less than 0.12 °/s. The angle random walk (ARW) and the bias instability (BI) of the LFM gyroscope are 0.316 °/ $\surd \text{h}$ and 2 °/h, respectively.

Digital Readout System for a Micro-Machined Gyroscope and Its Demodulation Algorithm

Digital Readout System for Micromachined Gyroscope and Analysis for Its Demodulation Algorithm

Design and Test of MEMS Gyroscope Control System Based on LMSD

Digital System Study Applied to Performance Detection of Optic Fiber Gyroscope

A Digital Control Structure for Lissajous Frequency-Modulated Mode MEMS Gyroscope

Noise Analysis and Modeling for a Digital Control Architecture for Lissajous Frequency-Modulated MEMS Gyroscope with Amplitude-Modulated Readout

Digitalization Study on Test System of Fiber Optic GYRO

Comparison Of Dsb And Ssb Demodulation Methods In General Control System Of Mems Gyroscopes

A novel demodulation scheme in the digital readout system for a micro-machined gyroscope

A Novel Amplitude-Phase Information Extraction Architecture for MEMS Vibratory Gyroscopes Using a Modified Double Side-Band Demodulation Configuration

Digital Control and Performance Test of a Symmetrical Doubly Decoupled Micro-Machined Gyroscope

High Performance Interface Circuit for MEMS Gyroscope

Digital Signal Processing For A Micromachined Vibratory Gyroscope Based On A Three Dimensional Adaptive Filter Demodulator

Digital Detection and Optimization Design for Resonant Fiber Optic Gyroscope

Low-Noise Low-Delay Digital Signal Processor for Resonant Micro Optic Gyro

Synchronous Digital Quadrature Demodulation Technique For Resonant Optic Gyroscopes

A Fully Integrated, Full Digital Output Lissajous Frequency-Modulated MEMS Gyroscope

Digital controller design for sense mode of micro-machined gyroscope

Design of Digital Demodulation Circuit for Closed Loop Control of Resonant MEMS Gyroscopes

The design and implementation of interface electronics for silicon micromechanical gyroscopes

An Improved Least Mean Square Demodulator Based on Adaptive Moment Estimation Algorithm for LFM MEMS Gyroscope