Abstract:Residual displacement serves as a crucial indicator in evaluating the safety and reparability of structures following seismic events. As a novel self-centering structure, the unbonded prestressed reinforced concrete (UBPRC) column has demonstrated its effectiveness in reducing residual displacement. However, there remains a lack of quantitative research concerning the influence of various structural and material parameters on residual displacement. For the quick and convenient evaluation of the seismic performance and resilience of UBPRC columns, in this paper, the influence of various parameters on the residual drift ratio of UBPRC columns was investigated by establishing a logarithmic linear relationship between the parameters and the residual drift ratio. These parameters include the longitudinal reinforcement and concrete strength ( f y and f c ), reinforcement ratio of longitudinal and transverse ( ρ l and ρ s ), prestressed strand ratio ( ρ p ), aspect ratio ( A r ), axial load ratio ( α c ), and prestressing force ratio ( α ps ). Among the two parameters related to prestressed strands, increasing the prestressing force ratio significantly reduces RDr , while the influence of the prestressed strand ratio on RDr is relatively small. On this basis, a matrix-based probabilistic predictive model for the residual drift ratio was established. According to various physical parameters, the proposed mathematical model accurately predicts the residual drift ratio and describes the influence of each parameter on it. Furthermore, an analytical resilience design approach was proposed, and an analytical expression in matrix form for a multi-parameter resilience design was derived. Lastly, the impact of parameters on the damage state was investigated, and the range of parameter values under investigation was established, according to the analytical resilience design approach.

Displacement-based deformation capacity design method of RC columns

Displacement-based Deformation Capacity Design Method of RC Cantilever Walls

Nonlinear Finite-Element Analysis of the Seismic Behavior of RC Column–Steel Beam Connections with Shear Failure Mode

Displacement-based Seismic Design Method for Square CFT Columns

Analysis and Behaviour of FRP-confined Short Concrete Columns Subjected to Eccentric Loading

Enhanced empirical models for predicting the drift capacity of less ductile RC columns with flexural, shear, or axial failure modes

Matrix-based predictive model of residual drift and analytical resilience design approach for self-centering columns

Prediction for lateral deformation capacity of corroded reinforced concrete columns

Design Approach of Elastic-Plastic Story Drift for Concrete-filled Steel Tubular Composite Frame

Drift capacity of high-strength concrete columns with mixed-grade longitudinal reinforcements

Maximum Drift Demands of Earthquake Damaged Reinforced Concrete Columns Based on Residual Flexure Cracks

Bayesian-based probabilistic models for the ultimate drift capacity of rectangular reinforced concrete columns failed in flexure mode

Calculation Method for Deformation Capacity of Steel Tube-Reinforced Concrete Composite Columns

Study of Displacement-Based Seismic Design for RC Frame Structures

Calculation of Creep Deformation of Stiffness-Degraded RC Beams after Strengthening with Increased Cross-Section

Prediction of Transverse Reinforcement of RC Columns Using Machine Learning Techniques

Development of a numerical model for RC columns considering seismic dynamic effect and different failure modes

Seismic design of rectangular/square columns in SDOF systems based on their damage performance

Evaluation of the seismic performance of reinforced concrete bridge columns based on plastic hinge model

The strain demand of reinforced concrete bridge columns under seismic loading

Deformation Capacity and Performance-Based Seismic Design for Reinforced Concrete Coupling Beams