Abstract:To explore the anti-penetration performance of the specially shaped ceramic/metal composite armor, such an armor is designed and fabricated using a semi-cylindrical projectile resistant ceramic and metal back plate, and its anti-penetration performance for the 12.7 mm armor-piercing incendiary (API) projectile (also known as the 0.50 caliber API projectile) is investigated experimentally and numerically. The results show that due to the significant attitude deflection during projectile penetration, the penetration into the designed ceramic composite armor is quite different from that into the conventional homogeneous ceramic/metal composite armor, which can be roughly divided into the following four stages: asymmetric erosion of the projectile, ceramic cone squeezing movement, back plate failure and projectile exit. The failure mode of the back plate is mainly dishing deformation and petaling failure. When obvious attitude deflection occurs to the projectile, the breaches in the back plate are elliptical in varying degrees, and the height and size of petals are apparently different. The area of the composite armor is divided into different zones according to its anti-penetration performance. The influence of the ratio of semi-cylindrical ceramic diameter to projectile core diameter ξ on the anti-penetration performance is studied under constant areal density. The results show that the deflection effect of the composite armor is small when the ratio ξ is less than 2, and the anti-penetration performance is the strongest when ξ is close to 2. With the increase in the initial velocity of the projectile, the deflection effect of the composite armor on the projectile gradually weakened, and the erosion effect gradually increased.

NUMERICAL STUDY ON THE PERFORATION RESISTIBILITY OF PLATE GIRDER TARGET

Numerical Study on the Perforation of Steel Plates by Multiple Projectiles

Investigation on the anti-penetration performance of the steel/nylon sandwich plate

Experimental and numerical investigation on the anti-penetration performance of metallic sandwich plates for marine applications

Study on Anti-Penetration Performance of Semi-Cylindrical Ceramic Composite Armor against 12.7 mm API Projectile

Numerical simulation of the disk fragment impacting resistance of plate target

Research on anti-penetration performance of composite armor of steel/composite materials

Penetration of Disk Fragments Following Impact on Thin Plate

NUMERICAL SIMULATION FOR THE EFFECT OF BROADSIDE STRUCTURE ON RESISTING TRUNCATED-OGIVE NOSE PROJECTILE PENETRATION

Ballistic testing and theoretical analysis for perforation mechanism of the fan casing and fragmentation of the released blade

Numerical Investigation on Perforation of Projectile Impacting Stiffened Plate

Research on the mechanical characteristics of the Z-type target plate of the warhead entirely penetrating the ship simulation structure

Research on the Kinetic Armor-Piercing Effect of Semi-Armor-Piercing Missile Warhead

Numerical investigation on dynamic damage behavior of a novel N-shaped perforated armor plate under ballistic impact

Experimental and numerical study of water-filled vessel impacted by flat projectiles

Numerical Simulation on Shaped Charge Jet Penetrating Single / Composite Structure of Target Plate

Numerical Simulation on the Anti-Penetration Performance of Polyurea-Core Weldox 460 E Steel Sandwich Plates

Numerical Simulation of Anti-Ship Missile Attack Warship Broadside Process

Numerical Analysis of Deformation and Failure of Penetration into Concrete Target by Projectile

Study on impact resistance of square fragments penetrating into new sandwich plates for ships: Theoretical derivation and experimental verification

Experimental numerical and analytical analysis of the penetration of a scaled double-hull tanker side structure