Abstract:Journal of Reinforced Plastics and Composites, Ahead of Print. Focusing on the energy absorption characteristics of ultra-high molecular weight polyethylene (UHMWPE) fiber laminated panels, this study conducts ballistic tests and numerical simulations using 6 mm spherical projectiles to impact the UHMWPE laminated panels. The residual velocity characteristics, energy absorption patterns, and failure modes of the UHMWPE laminated panels under steel ball impacts were analyzed. The results show that the residual velocity of the steel ball increases with the increase of the incident velocity. In the velocity range near the ballistic limit velocity, the residual velocity of the steel ball increases sharply. When the incident velocity exceeds 340 m/s, the increase in residual velocity gradually slows down, tending towards a straight line. When the steel ball velocity is less than 330 m/s, the energy absorption of the UHMWPE laminated panels exhibits linear growth with increasing velocity, with a maximum energy absorption of 47.3 J. In the 327–340 m/s velocity range, the energy absorption of the laminated panels drops sharply from 47 J to around 30 J. In the 340 m/s–600 m/s velocity range, the decline in energy absorption gradually becomes more moderate, decreasing to around 20 J. Beyond 500 m/s, the energy absorbed by the UHMWPE laminated panels stabilizes with increasing velocity, and the fiber tensile failure is the main form of energy absorption of UHMWPE composite laminates under ballistic impact. The failure process of UHMWPE laminated panels presents a multi-stage failure mode, including fiber shear failure, tensile failure, and delamination. As the projectile's incident velocity increases, the damage mechanism of the UHMWPE laminated panels transitions from tensile-dominated to shear plugging-dominated. Through similarity theory analysis, under certain conditions, the ballistic limit velocity and the dimensionless parameter of unit energy absorption for the UHMWPE laminated panels satisfy geometric similarity.

Study on impact resistance of square fragments penetrating into new sandwich plates for ships: Theoretical derivation and experimental verification

Experimental and numerical investigation on the anti-penetration performance of metallic sandwich plates for marine applications

Investigation on the anti-penetration performance of the steel/nylon sandwich plate

Numerical Study on the Perforation of Steel Plates by Multiple Projectiles

Numerical Simulation on the Anti-Penetration Performance of Polyurea-Core Weldox 460 E Steel Sandwich Plates

Research on anti-penetration performance of composite armor of steel/composite materials

Penetration of Disk Fragments Following Impact on Thin Plate

Ballistic performance of UHMWPE laminated plates and UHMWPE encapsulated aluminum structures: Numerical simulation

Numerical Analysis of the Impact Resistance of Composite A-Shaped Sandwich Structures

The impact resistance of composite Y-shaped cores sandwich structure

Experimental and numerical study of water-filled vessel impacted by flat projectiles

Anti-ballistic properties of hybrid UHMWPE fiber-reinforced composite armour

Mechanism-Driven Analytical Modelling Of Uhmwpe Laminates Under Ballistic Impact

Numerical Investigation on Effects of Blast Loading on Anti-Fragment Performance of Hollow Cylindrical UHMWPE Cross-Ply Laminate

Dynamic performance of ultralight corrugated sandwich plate with FML face-sheets impacted by FSP-foam composite projectile

The penetration resistance behavior and corresponding size effects of ultra-high molecular weight polyethylene composite laminates

Dynamic Response of UHMW-PE Composite Armors under Ballistic Impact of Blunt Projectiles

An analytical model to predict the impact of a bullet on ultra-high molecular weight polyethylene composite laminates

Analysis and Design for the Comprehensive Ballistic and Blast Resistance of Polyurea-Coated Steel Plate

Dynamic response of UHMWPE plates under combined shock and fragment loading

Dynamic Response Mechanisms of Thin UHMWPE under High-Speed Impact