Abstract:In the outer space, composite structures are always subject to cyclic thermal stress in which one surface of the structures facing to the Sun experiences temperature over 393 K while an opposite side is 173 K. Besides, the structures may also suffer from damages due to meteoroid attack, in which many tiny particles left over from the formation of the solar system and they are travelling at very high speed to cause serious impact and abrasion onto the structures. In the new Ares V Cargo Launch Vehicle (for the Mar's mission) designed by National Aeronautics and Space Administration (NASA), the core fuel storage tank will be made by using polymer-based composites and many materials science and engineering research have been conducted to better understand the behavior of these materials at cryogenic condition. In view of all aforementioned problems, composites used at the high attitude (at the level above the Troposphere) should be able to maintain high strength at low temperature environment. Epoxy-based composites are very popular for making advanced composites due to their high strength and chemically-inert properties, making them excellent to be used as aircraft and aerospace structural materials. However, epoxy normally behaves very brittle and therefore, loss of its toughness and impact performance at low temperature. Besides, due to their low energy dissipatability at low temperature, any impact imposed onto its structures would cause delamination and debond at an interface between reinforced fibre and matrix. Many studies have addressed that the use of single-walled (SWNTs) and multi-walled carbon (MWNTs) nanotubes could enhance the mechanical properties of polymer-based composites. However, interfacial bonding properties are always an issue as it would affect the efficiency and effectiveness of stress transfer in the composites. This paper addresses the viability of using coiled carbon nanotubes (CCNT) and randomly-oriented nanoclay-supported nanotubes (NSCNT) to enhance the mechanical properties of epoxy resin at the cryogenic environment. The results obtained from experimental fundings have shown that these nano-reinforcements could effectively enhance the property of epoxy due to their i) surface configuration which could induce the mechanical interlocking between the reinforcements and surrounding matrix and ii) the residual stress due to the shrinkage of the epoxy at low temperature environments.

Study on Micro-phase Toughened Epoxy Resin Adhesives for Cryogenic Engineering Applications

Internal Stress Analysis of Epoxy Adhesively‐boned Joints Based on Their Thermomechanical Properties at Cryogenic Temperature

Preparation, Characterization, and Curing Kinetics of Elevated and Cryogenic Temperature-Resistant Epoxy Resin Composites

Reinforcement of Epoxy Resins with Multi-Walled Carbon Nanotubes for Enhancing Cryogenic Mechanical Properties

RT and Cryogenic Mechanical Properties of Epoxy Resins Cured with Mixed Curing Agent

Mechanical Properties of Cryogenic Epoxy Adhesives: Effects of Mixed Curing Agent Content

Mechanical behaviors of hyberbranched epoxy toughened bisphenol F epoxy resin for cryogenic applications

Effect of free volume on cryogenic mechanical properties of epoxy resin reinforced by hyperbranched polymers

Investigation of Polyurethane Toughened Epoxy Resins for Composite Cryotank Applications. Part I: Phase Separation Phenomenon and Cryogenic Mechanical Behaviors

Experimental characterization and molecular dynamics simulation of thermal stability, mechanical properties and liquid oxygen compatibility of multiple epoxy systems for cryotank applications

Investigation of polyurethane toughened epoxy resins for composite cryotank applications. Part II: Theoretical analysis of toughening mechanisms

Mechanism of Matrix Influencing the Cryogenic Mechanical Property of Carbon Fibre Reinforced Epoxy Resin Composite

Cryogenic Mechanical Properties of Epoxy Resin Toughened by Hydroxyl-Terminated Polyurethane

Cryogenic Mechanical Behaviors of Carbon Nanotube Reinforced Composites Based on Modified Epoxy by Poly(Ethersulfone)

Epoxy-functionalized polysiloxane/Nano-SiO2 synergistic reinforcement in cryogenic mechanical properties of epoxy and carbon fiber reinforced epoxy laminate

Cryogenic Mechanical Properties and Failure Mechanism of Epoxy Nanocomposites Modified by Multiwalled Carbon Nanotubes with Tunable Oxygen‐containing Groups on Surface

A Preliminary Study on Cryogenic Mechanical Properties of Epoxy Blend Matrices and SiO<sub>2</sub>/Epoxy Nanocomposites

Study on room temperature curing two-component epoxy resin adhesive for steel crucibles

Carbon Nanotubes For Property Enhancement Of Epoxy At Cryogenic Environments

Effect of the Stoichiometric Ratio on the Crosslinked Network Structure and Cryogenic Properties of Epoxy Resins Cured at Low Temperature

The Improvement in Cryogenic Mechanical Properties of Nano-Zro2/Epoxy Composites Via Surface Modification of Nano-Zro2