Effect of SiC Nanoparticles on Mechanical and Damping Properties of Epoxy/Polysulfide Rubber Blend Composite
Salwan Hasan AlHumairee,Mustafa B. Hunain,Ibtihal A. Mahmood
DOI: https://doi.org/10.1088/1402-4896/ad43a0
2024-04-27
Physica Scripta
Abstract:Blend polymer matrix composite materials are becoming more and more popular due to their promising mechanical properties. In this research, a blend polymer mixture was made from epoxy resin (EP) blended with different weight percentages of PSR (polysulfide rubber) (0, 3, 6, 10, 15, and 20%). Then tensile, impact, bending strength, and damping ratio evaluated to get the high quality of mechanical properties for the blend matrix. Due to the requirements to enhance the mechanical properties of this blend; a various weight fraction of carbide silica (SiC) nanoparticles was used as a reinforcement in the ratios of (0, 1, 3, and 5%) by weight to the best ratio of the blended matrix. Tensile, impact, bending, and damping ratio tests also conducted to get the best mechanical properties for the blended materials. Experimental results for the blend matrix showed that adding polysulfide rubber to epoxy resin resulted in a decrease in Young's modulus, tensile strength, and bending strength; however, the damping ratio and the impact strength increased. It found that the weight fraction of 6% of PSR is the better case, which gives the better mechanical properties for mixture. The utility of this mixture; it has intermediates between flexible properties of a mixture at the highest rate of PSR and brittle mechanical properties for EP resin. Mechanical and damping properties showed an increase when the carbide silica (SiC) with a weight fraction of 3% was added, then it decreased slightly.
physics, multidisciplinary