Abstract:Polyethylene is widely used as insulation in power cables with its excellent electrical properties except its low thermal conductivity. However, insulation-related thermal problems pose a limitation on the ampacity of HVDC cables. Improving the thermal conductivity of insulation may contribute to heat dissipation of cable system and enhance its ampacity. In this work, in order to investigate the effects of improved thermal conductivity of insulation on temperature field and ampacity in a single buried HVDC cable, a numerical simulation model is established by finite element method (FEM) and the cable ampacity is calculated by a modified iteration method. Meanwhile, a range of low-density polyethylene (LDPE) based composites filled with hybrid boron nitride (BN) particles at different loadings are prepared to get reasonable model parameters. Thermal conductivity of various samples is measured and the obtained result shows that the thermal conductivity of BN filled LDPE composite is improved greatly. The simulation results show that the cable core temperature is reduced obviously and the temperature field distribution in insulation becomes more uniform with increasing the thermal conductivity. Besides, the temperature difference between inside and outside of insulation layer shows a decreasing trend at a given load current. Namely, the cable can transmit higher current under the maximum operating temperature due to the improvement of thermal conductivity. All the conclusions imply that the improved thermal conductivity of insulation is of great benefit to the improvement of HVDC cable ampacity.

Ampacity Calculation for Groups of Buried Cable

Calculation of Ampacity of Double-loop XLPE Cables in Trenches Based on Multiphysics Simulation

Numerical Calculation of Real-Time Ampacity of High Voltage Power Cable Duct Laying Based on Environmental Information

Inversion of Soil Thermal Conductivity and Ampacity of the Buried High Voltage Power Cables

Real‐time Calculation of Three Core Cable Conductor Temperature Based on Thermal Circuit Model with Thermal Resistance Correction

Investigation on Circulation Current Calculation and Grounding Methods of Multi-circuit Cables

Analysis of the Three-Dimensional Temperature Distribution and Ampacity of Forced Ventilation Multi-loop Cable Tunnel by Finite Element Method

Grounding System Analysis of 220 Kv Power Cable Lines Installed Underneath a Bridge

Simulation and Calculation of Temperature Field and Current-Carrying Capacity of Power Cables under Different Laying Methods

Steady-state Electrical Properties and Loss Reduction Measures Analysis for 220 Kv Tunnel Cable System

Research on the Improvement of Cable Ampacity in Dense Cable Trench

Calculation and Analysis of 220kV Cross-River Cable Carrying Capacity Considering Complex Environments, Part I — Analysis of Thermal Problems for the Entry Section of Overhead Transmission Line to Underground Cable

Sheath Loss Calculation and Loss Reduction Analysis of 220 Kv Cable System

Performance of Different Grounding Systems of 500 Kv XLPE Long Submarine Cables Based on Improved Multiconductor Analysis Method

Analysis on three-core power cable temperature field and ampacity model under typical laying environment

Coupled Thermal-Electrical Analysis of 110 Kv Corrugated Aluminum Sheathed and Smooth Aluminum Sheath Cables Based on Finite Element Simulation Method

An improved analytical thermal rating method for cables installed in short-conduits

Study on Finite Element Analysis of the External Heat Resistance of Cables in Ductbank

Improved ampacity of buried HVDC cable with high thermal conductivity LDPE/BN insulation

Investigation on the improvement method of ampacity for cable in duct bank: Using the mixed filler with high thermal conductivity material and phase change material

Improvement of cable current carrying capacity using COMSOL software