Abstract:A ZW-126/D2000-40 type single-break vacuum circuit breaker (VCB) with controlled switching technology is designed and produced in this paper. The results of type tests based on IEC and GB standards are presented. A 126 kV single-break vacuum interrupter (VI) with 3/4 coil axial magnetic field (AMF) contacts is used in the VCB, which can interrupt short currents of 40 kA. The external insulation of the VI is provided by SF6 at 0.1 MPa. In order to match the 126 kV single-break VI and controlled switching device, a long-stroke electro-magnetic force actuator (EMFA) with 16 kN closing holding force and 3.5 m/s average opening speed is designed. Moreover, a position tracking controlled switching device based on closed-loop control using the technology of a fuzzy control algorithm and pulse width modulation is applied to the controlled switching device. This device is applied to control the coil current of EMFA and the electromagnetic force, so as to control the EMFA to follow the ideal position curve. The type tests of 126 kV VCB are all passed according to the IEC62271-100 and GB1984-2014, including dielectric tests, basic short-circuit tests, short-line fault tests, out-of-phase tests, etc. The strong capacitive current breaking capacity and mechanical strength of the VCB are proved by the capacitive current switching test of class C2, electrical endurance test of class E2 and mechanical endurance test of class M2. The electromagnetic compatibility (EMC) tests are passed according to the IEC61000-4. The controlled switching test of capacitive current was successful according to IEC62271-302 and GB/T30846-2014, and the controlled switching accuracy is less than ± 0.5 ms. The test results show that the VCB has excellent performance, which has broad application prospects in special occasions at a 126 kV voltage level, such as a switching capacitor and no-load transformer, etc.

Controlled switching of shunt capacitor banks with vacuum circuit breaker

Switch control method based on switch table decision of hybrid system composed of APF and TSC

A Novel Controlled Switching Strategy of Back-to-back Capacitor Banks Considering the Prestrike Characteristics of Vacuum Circuit Breakers

Design Of A 126 Kv Double-Break Fast Vacuum Circuit Breaker For Controlled Switching

A Novel Control Strategy of Phase-Controlled Switching Technology for Vacuum Circuit Breaker

Research on 40.5kv Two-Break Vacuum Circuit Breaker for Switching Capacitor Banks

Back-to-back Capacitor Bank Switching Performance of Vacuum Circuit Breaker by Series Technology

Experimental Study on Fast Isolating Switch with Vacuum Multi-breaks

A Fast LVDC Vacuum Hybrid Circuit Breaker: Dielectric Recovery and Design Consideration

Capacitive Current Switching Performance of Vacuum Interrupters with Different Magnetic Fields

Control strategy and experimental verification of hybrid DC circuit breaker

A Scheme for Current-limiting Hybrid DC Circuit Breaker

Vacuum Switching Technology for Future of Power Systems

Controlling Strategy and Implementation for Synchronously Closing 550 Kv Parallel Capacitor

A Novel High-Efficient and Miniaturized Operating Method for Ultra-Fast Vacuum Switch

Current-transferring High Voltage DC Breaker

Controlled Fast Vacuum Breaking of an AC Short-Circuit Current in a Short-arcing Time

A Novel Bidirectional Nonuniform Hybrid Circuit Breaker Considering Different Direction Protection Requirements

A novel controllable capacitor commutation based superconducting hybrid direct current breaker

Trend of Contact Surface Condition in VCB Investigated Using DC Dynamic Gap Measurement Method During Capacitive Switching

Development and type test of ZW-126/D2000-40 vacuum circuit breaker with controlled switching technology