Abstract:The operating safety of spacecraft in space environments is closely related to the surface discharging phenomenon of dielectrics such as polyimide (PI) film in solar arrays; moreover, carrier traps in the dielectric can affect its insulation performance. Therefore, to improve the vacuum surface flashover characteristics of PI film by nano modification and reveal the effect of trap distribution on the flashover of PI composite film, first, the original PI and nano-ZnO/PI composite films with different additive amounts (0.5, 1, 2, and 3 wt.%) were prepared by in situ polymerization and their performance was evaluated by the physicochemical properties characterized by methods such as thermogravimetric analysis; second, the surface traps of the original and nanocomposite films were measured and calculated by surface potential decay method, and the carrier mobility was also obtained; finally, the vacuum direct current (DC) surface flashover characteristics and bulk resistivity of all the film samples were measured and analyzed. The experiment results showed that with the increase in the amount of nano-ZnO, both the shallow and deep trap density increased significantly, while the trap energy varied slightly, and the surface flashover voltage also increased obviously. Based on the multi-core model, the increases in the shallow and deep trap density after the introduction of nano-ZnO into the PI matrix was analyzed from the microscopic perspective of the interface. Based on the comparative analysis of the trap distribution and surface flashover voltage characteristics, a bilayer model of vacuum DC surface flashover development was proposed. In the bilayer model, deep traps and shallow traps play a dominant role in the vacuum-solid interface and the inner surface of the dielectric, respectively, and increasing the trap density could effectively inhibit secondary electron multiplication on the surface and accelerate charge dissipation inside the film. Consequently, nano-ZnO can purposefully control the trap distribution, and then improve the flashover characteristics of nano-ZnO/PI composite films, which provides a new approach for improving the spacecraft material safety.

Investigation on Novel Characterization Parameters of Surface Flashover Phenomena in Vacuum

Correlation Between Trapping Parameters and Surface Insulation Strength of Solid Dielectric under Pulse Voltage in Vacuum

Analysis on Surface Charging of Insulator Prior to Flashover in Vacuum

Surface Flashover of Alumina Ceramic Insulators in Vacuum

Surface charge dissipation and DC flashover characteristic of DBD plasma treated epoxy resin/AlN nanocomposites

Analysis of insulator surface charging due to charge injection and secondary electron emission in vacuum

Surface flashover in 50 years: Theoretical models and competing mechanisms

Revealing the flashover mechanism of EP/GF composite insulation under DC combined harmonic voltage

Effects of surface roughness on surface charge accumulation characteristics and surface flashover performance of alumina-filled epoxy resin spacers

Surface flashover in 50 years: II. Material modification, structure optimisation, and characteristics enhancement

Investigation on Pulsed Flashover Characteristics Across Novel Machinable Ceramic in Vacuum

The Flashover of Epoxy Initiated by Micron Metal Particles under DC Voltage: Phenomenon and Mechanism

Mechanism exploration of ion-implanted epoxy on surface trap distribution: An approach to augment the vacuum flashover voltages

Effect of Trap Regulation on Vacuum DC Surface Flashover Characteristics of Nano-ZnO/PI Film

The Potentially Neglected Culprit of DC Surface Flashover: Electron Migration under Temperature Gradients

Investigation on Flashover of Polymer Insulators Caused by Foreign Bodies

A Review on Surface Flashover Phenomena at DC Voltage in Vacuum and Compressed Gas

Surface Microcosmic Phenomena Induced by Pulsed Flashovers

Effect of Deposited Charge on Vacuum DC Surface Flashover Under Electron Beam Irradiation

Integrated modelling of vacuum flashover development: Above‐surface processes and breakdown threshold analyses

Surface Flashover Characteristics of Semiconductor