Abstract:Flow fields in commercial airliner cabins are crucial for creating a thermally comfortable and healthy cabin environment. Flow fields depend on the thermo-fluid boundary conditions at the diffusers, in addition to the cabin geometry and furnishing. To study the flow fields in cabins, this paper describes a procedure to obtain the cabin geometry, boundary conditions at the diffusers, and flow fields. This investigation used a laser tracking system and reverse engineering to generate a digital model of an MD-82 aircraft cabin. Even though the measuring error by the system was very small, approximations and assumptions were needed to reduce the workload and data size. The geometric model can also be easily used to calculate the space volume. A combination of hot-sphere anemometers (HSA) and ultrasonic anemometers (UA) were applied to obtain the velocity magnitude, velocity direction, and turbulence intensity at the diffusers. The measured results indicate that the flow boundary conditions in a real cabin were rather complex and the velocity magnitude, velocity direction, and turbulence intensity varied significantly from one slot opening to another. UAs were also applied to measure the three-dimensional air velocity at 20 Hz, which could also be used to determine the turbulence intensity. Due to the instability of the flow, it should at least be measured for 4 min to obtain accurate averaged velocity and turbulence information. It was found that the flow fields were of low speed and high turbulence intensity. This study provides high quality data for validating Computational Fluid Dynamics (CFD) models, including cabin geometry, boundary conditions of diffusers, and high-resolution flow field in the first-class cabin of a functional MD-82 commercial airliner. (C) 2012 Elsevier Ltd. All rights reserved.

The numerical analysis of temperature and velocity fields in air-conditioned compartment

Numerical simulation of the air distribution in a typical ship cabin

CFD Analysis of Air Velocity Distribution in Space Station Cabin

Numerical Simulation and Air Volume Distribution of Cabin Ventilation Ductwork

State-of-the-art Methods for Studying Air Distributions in Commercial Airliner Cabins

Transport cabin environments ACCURATE EXPERIMENTAL MEASUREMENTS OF FLOW BOUNDARY CONDITIONS FOR NUMERICAL SIMULATIONS IN AN AIRCRAFT CABIN

Studies of Air-Flow and Temperature Fields Inside a Passenger Compartment for Improving Thermal Comfort and Saving Energy. Part I: Test/numerical Model and Validation

Experimental Simulations Of Flow Fields Within Air-Conditioning Aircraft Cabin

Experimental investigation of air distribution in an airliner cabin mockup with displacement ventilation

Numerical Study on Air Quality and Thermal Comfort in High Speed Train Compartment with Underfloor Air Supply

Numerical Simulation of Ventilation and Analysis in Ship Engine Room

Numerical Simulation of Inner Flow for High Speed Train Compartment Using Computational Fluid Dynamics

Numerical Simulation and Analysis of Air Supply Mode in Luxury Cruise Air-conditioning System

Global Airflow Field Distribution in a Cabin Mock-Up Measured Via Large-Scale 2D-PIV

Optimization analysis of air-conditioning duct structure of high-velocity train

Performance Evaluation of Different Air Distribution Systems in an Aircraft Cabin Mockup

Numerical Simulation and Optimization for the Air Conditioning and Ventilation System in the Compartment of Urban Rail Train

Simulation of Flow Field and Heat Transfer in Passenger Compartment

Accurate and High-Resolution Boundary Conditions and Flow Fields in the First-Class Cabin of an MD-82 Commercial Airliner

Numerical simulation of air distribution in chair ventilated rooms by simplified methodology

Numerical Study of the Air Flow Through an Air-Conditioning Unit on High-Speed Trains