Abstract:A heat exchanger is an important component where high-temperature hot air and normal-temperature water exchange heat. The heat exchange area of the finned tube heat exchanger is calculated by the rated working conditions. However, with the decrease of the heat storage temperature, the hot air temperature at the outlet of the thermodynamic energy storage device changes in a large range, directly affecting the heat exchange capacity and efficiency of the finned tube heat exchanger. This paper's three-dimensional model is established. The heat exchanger of the finned tube is designed according to the temperature of the outlet section and the return section temperature of the heat storage system. The thermodynamic physical parameter property and characteristics of which heat exchanger's finned tube in the air's velocity range of 1∼10 m/s are simulated by fluent software. The velocity, temperature, pressure, and heat exchanger coefficient distribution characteristics at different positions along the airflow direction are obtained. The simulation results show that the mean flow velocity is 2.0 m/s and 5.0 m/s at the inlet cross-section. The average temperature difference between the inlet and outlet is 69.5 K and 100.5 K, respectively. The fin surface temperature difference between the first and eighth rows of finned tubes is 12.5 K and 14.4 K, respectively. The air pressure loss at the air channel inlet's section and outlet's section is 16.1 Pa and 69.4 Pa, respectively. When the inlet flow rate change from starting at 1.0 m/s and ending at 10.0 m/s, the tube's wall coefficient of heat transfer, which is the second level of finned tubes, only increases by 1.8 times. The tube's wall coefficient of heat transfer of the eighth level of finned tubes increases by the maximum, to 5 times the original, but the heat energy exchange capacity of which the second level of finned tubes is always the strongest.

Simulation for Fin-and-tube Heat Exchanger Based on the Technology of Database and Visualization

Visualized Simulation of Fin-and-Tube Heat Exchanger Based on OpenGL

Functional Implementation of Object-Oriented Visualized Auto-Modeling Simulation System for Fin-and-Tube Heat Exchanger

Numerical Simulation of Mass and Heat Transfer in Detachable Spiral Heat Exchanger

A General Simulation Model for Performance Prediction of Plate Fin-and-tube Heat Exchanger with Complex Circuit Configuration

Simulation of Fin-and-tube Heat Exchanger Based on Two-phase Fluid Network

Dynamic Modeling And Simulation Of Distributed Parameter Heat Exchanger

Numerical Simulation and Analysis of Performance of Fin-and-tube Heat Exchanger with Complex Circuit Arrangement

Research Three Simulation Models for Fin and Tube Exchanger Used by Air Handle Unit

Numerical Simulation of Heat Transfer Characteristics of Finned Tube Heat Exchanger at Different Flow Velocities

Numerical Investigation on Fin-Tube Three-Fluid Heat Exchanger for Hybrid Source HVAC&R Systems

Dynamic Performance Modeling and Simulation of the Counterflow Plate-fin Heat Exchanger

A digital designing for fin and tube exchanger based on lumped models

Numerical Simulation of Heat Transfer in Finned Tube of Heat Recovery Unit Using Fluid-Solid Coupled Method

A Frequency Domain Dynamic Simulation Method for Heat Exchangers and Thermal Systems

3D Numerical Simulation on Fluid Flow and Heat Transfer Characteristics in Multistage Heat Exchanger with Slit Fins

CFD Technology for Finned Tube Heat Exchanger Base on Line and Interleaving Constracts

Modeling and Simulation for Heat Exchanger Based on DeltaV Experimental Simulation System

Two parallel methods for the three-dimensional CFD coupling simulation of shell and tube heat exchangers

Multi-scale simulation and optimization on a thermal management system of intermediate circuit and experiment validation

Three dimensional numerical simulation on surface performance of a plate-fin heat exchanger.