Abstract:A heat exchanger is an important component where high-temperature hot air and normal-temperature water exchange heat. The heat exchange area of the finned tube heat exchanger is calculated by the rated working conditions. However, with the decrease of the heat storage temperature, the hot air temperature at the outlet of the thermodynamic energy storage device changes in a large range, directly affecting the heat exchange capacity and efficiency of the finned tube heat exchanger. This paper's three-dimensional model is established. The heat exchanger of the finned tube is designed according to the temperature of the outlet section and the return section temperature of the heat storage system. The thermodynamic physical parameter property and characteristics of which heat exchanger's finned tube in the air's velocity range of 1∼10 m/s are simulated by fluent software. The velocity, temperature, pressure, and heat exchanger coefficient distribution characteristics at different positions along the airflow direction are obtained. The simulation results show that the mean flow velocity is 2.0 m/s and 5.0 m/s at the inlet cross-section. The average temperature difference between the inlet and outlet is 69.5 K and 100.5 K, respectively. The fin surface temperature difference between the first and eighth rows of finned tubes is 12.5 K and 14.4 K, respectively. The air pressure loss at the air channel inlet's section and outlet's section is 16.1 Pa and 69.4 Pa, respectively. When the inlet flow rate change from starting at 1.0 m/s and ending at 10.0 m/s, the tube's wall coefficient of heat transfer, which is the second level of finned tubes, only increases by 1.8 times. The tube's wall coefficient of heat transfer of the eighth level of finned tubes increases by the maximum, to 5 times the original, but the heat energy exchange capacity of which the second level of finned tubes is always the strongest.

Numerical Simulation and Analysis of Performance of Fin-and-tube Heat Exchanger with Complex Circuit Arrangement

A General Simulation Model for Performance Prediction of Plate Fin-and-tube Heat Exchanger with Complex Circuit Configuration

Simulation of Fin-and-tube Heat Exchanger Based on Two-phase Fluid Network

Numerical Study on Optimization Design of Circuit Arrangement for Tube-Fin Heat Exchanger

Numerical Simulation on the Convection Heat Transfer of a Single-tube Heat Exchanger at Turbulent Condition

Performance Simulation and Structure Optimization for Fin -tube Heat Exchanger in Air Handle Unit

Numerical simulation on heat performance of finned tube heat exchanger used in low-boiling fluid power generation

Analysis on The Performance of Fin-tube Heat Exchanger with Different Structures in Variable Conditions

Numerical Simulation of Heat Transfer Characteristics of Finned Tube Heat Exchanger at Different Flow Velocities

Model Analysis on the Performance of Fin-tube Heat Exchanger with Variable Condition/Structure

Numerical Analysis of H-type Finned-tube Heat Exchanger

The Simulation of V-shaped Heat Exchanger Based on the CFD Theory

3D Numerical Simulation on Fluid Flow and Heat Transfer Characteristics in Multistage Heat Exchanger with Slit Fins

NUMERICAL SIMULATION OF LAMINAR FLOW AND HEAT TRANSFER IN SHELL-AND-TUBE HEAT EXCHANGER WITH HELICAL BAFFLES

Research Three Simulation Models for Fin and Tube Exchanger Used by Air Handle Unit

NUMERICAL ANALYSIS OF AN AIR - COOLED PLAIN - FINNED TUBE HEAT EXCHANGER

Numerical Simulation and Experimental Study of Three-Dimensional Flow Outside Tube of Plate-Fin and Tube Heat Exchangers

Numerical simulation of heat transfer and flow performance of flat fin

Application Study of Numerical Simulation for Longitudinal Flow of Shell - Side Heat Exchanger

Multi-scale simulation and optimization on a thermal management system of intermediate circuit and experiment validation

Numerical simulation of heat transfer and flow characteristics for plate fin-and-tube heat exchanger with ring-bridge slit fins