Abstract:The established linear fatigue life prediction model based on the Miner rule has been widely applied to fatigue life prediction under constant amplitude uniaxial and multiaxial loading. Considering the physical significance of crack formation and propagation, a multiaxial equivalent linear fatigue life prediction model is put forward based on Miner rule and critical plane method under constant amplitude loading. The essence of this approach is that the equivalent strain, which consists of the shear strain and normal strain on the critical plane, replaces the relevant parameter of uniaxial nonlinear fatigue damage model. The principal axes of stress/strain rotate under non-proportional loading. Meanwhile, the microstructure of material and slip systems change, which lead to additional hardening effect. The ratio of cyclic yield stress to static yield stress is used to represent the cyclic hardening capacity of material, and the influence of phase difference and loading condition on the non-proportional hardening effect is considered. The multiaxial fatigue life is predicted using equivalent stain approach, maximum shear stain amplitude model, CXH model, and equivalent multiaxial liner model under proportional and/or non-proportional loading. The smooth and notched fatigue specimens of four kinds of materials (Q235B steel, titanium alloy TC4, Haynes 188, and Mod.9Cr-1Mo steel) are used in the multiaxial fatigue experiments to verify the proposed model. The predicted results of these materials are compared with the test results, and the results show that these four models can achieve good effect under proportional loading, but the proposed model performs better than the other three models under non-proportional loading. Meanwhile, it also verifies that the proposed enhancement factor can reflect the influence of phase difference and material properties on additional hardening.

A New Multiaxial Fatigue Damage Parameter under Multiaxial Low Cycle Loading

Multiaxial Fatigue Life Prediction Based on Damage Mechanics and Critical Plane Method

Multiaxial Fatigue Damage Parameter and Life Prediction for Medium-Carbon Steel Based on the Critical Plane Approach

Multiaxial Fatigue Damage Parameter and Life Prediction under Low Cycle Loading for Gh4169 Alloy and Other Structural Materials

A Unified Multiaxial Fatigue Damage Parameter

Multiaxial Fatigue Damage Model with Three Parameters Based on the Critical Plane Approach

Multiaxial Fatigue Life Prediction Model Based on Critical Plane Approach

Multiaxial Fatigue Lifetime Estimation Based on New Equivalent Strain Energy Damage Model under Variable Amplitude Loading

Multiaxial Fatigue Damage Parameter and Life Prediction without Any Additional Material Constants

Low-Cycle Fatigue Life Prediction Under Multiaxial Non-Proportional Loads

Multiaxial Fatigue Damage Models

Fatigue Life Prediction under Variable Amplitude Axial–torsion Loading Using Maximum Damage Parameter Range Method

A New Path‐dependent Multiaxial Fatigue Model for Metals under Different Paths

Multiaxial high-cycle fatigue failure and life prediction based on critical plane method

Comparison of Multiaxial Fatigue Damage Models under Variable Amplitude Loading

Multiaxial Fatigue Life Evaluation Using Strain Energy -Based Critical Plane Approach

Multiaxial Notch Fatigue Life Prediction Based on the Dominated Loading Modes under Variable Amplitude Loading

Multiaxial Fatigue Life Prediction Based on Nonlinear Continuum Damage Mechanics and Critical Plane Method

Prediction of Multiaxial Fatigue Life for Complex Three‐dimensional Stress State Considering Effect of Additional Hardening

A new multiaxial fatigue life prediction model considering additional hardening effect

New strain energy-based critical plane approach for multiaxial fatigue life prediction