Abstract:The established linear fatigue life prediction model based on the Miner rule has been widely applied to fatigue life prediction under constant amplitude uniaxial and multiaxial loading. Considering the physical significance of crack formation and propagation, a multiaxial equivalent linear fatigue life prediction model is put forward based on Miner rule and critical plane method under constant amplitude loading. The essence of this approach is that the equivalent strain, which consists of the shear strain and normal strain on the critical plane, replaces the relevant parameter of uniaxial nonlinear fatigue damage model. The principal axes of stress/strain rotate under non-proportional loading. Meanwhile, the microstructure of material and slip systems change, which lead to additional hardening effect. The ratio of cyclic yield stress to static yield stress is used to represent the cyclic hardening capacity of material, and the influence of phase difference and loading condition on the non-proportional hardening effect is considered. The multiaxial fatigue life is predicted using equivalent stain approach, maximum shear stain amplitude model, CXH model, and equivalent multiaxial liner model under proportional and/or non-proportional loading. The smooth and notched fatigue specimens of four kinds of materials (Q235B steel, titanium alloy TC4, Haynes 188, and Mod.9Cr-1Mo steel) are used in the multiaxial fatigue experiments to verify the proposed model. The predicted results of these materials are compared with the test results, and the results show that these four models can achieve good effect under proportional loading, but the proposed model performs better than the other three models under non-proportional loading. Meanwhile, it also verifies that the proposed enhancement factor can reflect the influence of phase difference and material properties on additional hardening.

Fatigue Life Prediction under Variable Amplitude Axial–torsion Loading Using Maximum Damage Parameter Range Method

Multiaxial Fatigue Life Prediction Based on Damage Mechanics and Critical Plane Method

Multiaxial Fatigue Lifetime Estimation Based on New Equivalent Strain Energy Damage Model under Variable Amplitude Loading

Multiaxial Notch Fatigue Life Prediction Based on the Dominated Loading Modes under Variable Amplitude Loading

Multiaxial notch fatigue life prediction based on the dominated loading control mode under variable amplitude loading

Fatigue Life Prediction under Variable Amplitude Loading Using a Non-Linear Damage Accumulation Model

Multiaxial Fatigue Damage Parameter and Life Prediction for Medium-Carbon Steel Based on the Critical Plane Approach

Multiaxial Fatigue Damage Parameter and Life Prediction without Any Additional Material Constants

Life prediction method based on damage mechanism for titanium alloy TC4 under multiaxial thermo-mechanical fatigue loading

Multiaxial Fatigue Life Prediction Based on Nonlinear Continuum Damage Mechanics and Critical Plane Method

A New Model For Predicting Crack Initiation Life In Thin Walled Tubes Under Multiaxial Proportional Loading

Low-Cycle Fatigue Life Prediction Under Multiaxial Non-Proportional Loads

Multiaxial Fatigue Life Prediction Model Based on Critical Plane Approach

An evaluation method of fatigue life under multi-axial loading based on damage accumulation theory

A Strategy for Fatigue Life Estimation under Variable Amplitude Loading in Consideration of Load Sequence Based on Damage Mechanics

A Fatigue Driving Energy Approach to High‐cycle Fatigue Life Estimation under Variable Amplitude Loading

A new multiaxial fatigue life prediction model considering additional hardening effect

A Modified Cumulative Damage Model for Fatigue Life Prediction under Variable Amplitude Loadings

Tension-Torsion High-Cycle Fatigue Life Prediction of 2A12-T4 Aluminium Alloy by Considering the Anisotropic Damage: Model, Parameter Identification, and Numerical Implementation

Multiaxial fatigue life estimation based on weight-averaged maximum damage plane under variable amplitude loading

Multiaxial high-cycle fatigue failure and life prediction based on critical plane method