Abstract:Effects of concentration of chlorohydrocarbon and reaction time on the catalytic performance of 20% Ag–0.1% Y2O3–0.1% K2O/α-Al2O3 catalyst for the epoxidation of propylene by molecular oxygen were investigated, in which the role of chlorohydrocarbon in increasing selectivity of propylene oxide (PO) was characterized by XRD, SEM-EDS and XPS. With an increase in the concentration of chlorohydrocarbon in the feed gas, PO selectivity increased significantly and propylene conversion decreased remarkably and then the catalytic performance remained nearly constant when the concentration of chlorohydrocarbon was more than 125ppm. PO selectivity increased from 46.8% to 75.6% and propylene conversion declined from 4.0% to 0.77% after 10h induction period, and then the catalytic performance remained nearly constant for 140h, under the reaction conditions of 245°C, 0.1MPa, GHSV of 2000h−1, and 125ppm 1,1,1-trichloroethane (TCE). A small amount of TCE could effectively control the surface morphology of the catalyst and restrain the agglomeration of Ag crystallites, in which TCE was dissociated on the surface of Ag crystallites to form AgCl and the coexistence of Ag and AgCl was favorable to increase PO selectivity. The presence of Cl could withdraw electrons from nearby Ag and thus make Ag electropositive, which was beneficial to produce more active sites where electrophilic oxygen species could be absorbed to increase PO selectivity. Y2O3 played a role of electron-type promoter that could strongly polarize electron cloud of nearby Ag, which made the absorbed oxygen species hold proper electrophilic character and then attack CC bond of propylene to produce PO.

Effect of Additive in Feedstock on Performance of Ag-MoO3/ZrO2 Catalyst for Propylene Epoxidation by Molecular Oxygen

Effect of preparation condition on performance of Ag–MoO3/ZrO2 catalyst for direct epoxidation of propylene by molecular oxygen

Modification of Ag-MoO3/ZrO2Catalyst with Metallic Chloride for Propylene Epoxidation by Molecular Oxygen

Epoxidation of propylene to propylene oxide catalyzed by μ-oxo-bismetalloporphyrins

Epoxidation of Propylene by Molecular Oxygen over Modified Ag–MoO 3 Catalyst

Promotional Effect of Y2O3 on the Performance of Ag/α-Al2O3 Catalyst for Epoxidation of Propylene with Molecular Oxygen

Effects of Pore Structure on Methanol Selectivity in Carbon Monoxide Hydrogenation

Study on Ag-Mo Catalyst for Direct Vapor-Phase Epoxidation of Propylene by Molecular Oxygen

Direct Epoxidation of Propylene with Molecular Oxygen over Ag–MoO3/ZrO2 Catalyst

Preparation of Ag-MoO3/Molecular Sieves Catalysis for Vapor-phase Epoxidation of Propylene to Propylene Oxide

In Situ FT-IR Study on the Direct Gas Phase Epoxidation of Propylene over Ag-MoO3 Catalyst

Epoxidation of Propylene by Molecular Oxygen over the Ag–Y2O3–K2O/α-Al2O3 Catalyst

Role of Chlorohydrocarbon in Increasing Selectivity of Propylene Oxide over Ag–Y2O3–K2O/α-Al2O3 Catalyst for Epoxidation of Propylene by Molecular Oxygen

Direct epoxidation of propylene by molecular oxygen over Y2O3 and K2O-promoted Ag/α-Al2O3 catalyst

Olefin Metathesis over Heterogeneous Catalysts: Interfacial Interaction Between Mo Species and a Hβ−Al2O3 Composite Support

Effect of Ag addition on performance of Au/TS-1-B catalyst in gas phase propylene epoxidation

Study on direct aromatization reaction of methane: I. The reaction performance of supported Mo catalysts under oxygen-free conditions

Lewis Acid Property and Catalytic Performance of MoO3/SiO2 for Propylene Epoxidation by CHP: Effects of Precipitant Ph Value and Rare Earth Additive

Promoting Effect of Mg in Supported Mo/HBeta–Al2O3 Catalyst for Cross-Metathesis of Ethene and Butene-2 to Propene

Enhancement of Propylene Metathesis Performance of MoO 3 /Al 2 O 3 with Promotion of Phosphoric Acid